
Marsauto M1C H11 LED Fog Light Bulbs, 30000LM 6000K Cool ...
$17.99
Buy on Amazon →
Used for: Fog Light Bulb Front
Used for: Fog Light Bulb Front
Used for: Headlight Bulb High Beam and Low Beam(with halogen headlights)
Used for: Headlight Bulb High Beam and Low Beam(with HID headlights)
Used for: Back Up Reverse Light Bulb
Used for: License Plate Light Bulb, Courtesy Light Bulb(Compare to original - Option 2), Reading Light Bulb Rear
Used for: License Plate Light Bulb, Courtesy Light Bulb(Compare to original - Option 2), Reading Light Bulb Rear
Used for: Courtesy Light Bulb(Compare to original - Option 1), Interior Door Light Bulb, Trunk or Cargo Area Light
Used for: Glove Box Light Bulb
Used for: Glove Box Light Bulb
Used for: Map Light Bulb
This page covers the bulb sizes for the 2014 Chrysler 300 and helps you verify the correct replacement by lighting position. Use it to match the bulb type to the exact lamp on the car, whether you are replacing exterior lights, interior lights, or headlight bulbs.
Because the 2014 Chrysler 300 can use different lighting setups, the correct bulb may depend on trim, market, body style, and factory options. Checking the bulb location first makes it much easier to find the right fit before you buy.
For best results, compare the bulb in your vehicle with the listing on this page before ordering. Some 2014 Chrysler 300 models use halogen headlights with 9012 bulbs, while HID-equipped models use D3S bulbs for high beam and low beam. Front fog lights may use H11 LED or H16 LED depending on the setup, and several interior positions use different bulb families such as 562, 578, 2825/98, or 194/7441. If your car has been converted to aftermarket LED bulbs, check the installed bulb style and connector carefully, since previous modifications can change what is actually in the housing. Always confirm the old bulb shape, base, and socket fitment before purchase, especially on vehicles with option-dependent lighting packages.
Models equipped with HID headlights use a D3S bulb for both high beam and low beam functions.
Models with halogen headlights use a 9012 bulb for the high beam and low beam headlight setup.
The front fog light bulb listing shows H11 LED and H16 LED, so the correct choice depends on the specific factory setup.
The license plate light bulb is listed as 2825 or 98.
The map light uses a 578 bulb.
The glove box light bulb is listed as 194 or 7441.
The trunk or cargo area light uses a 562 bulb.
The interior door light bulb and courtesy light bulb option 1 both use a 562 bulb.
The rear reading light bulb and courtesy light bulb option 2 both use a 2825 or 98 bulb.
The back up reverse light bulb is listed as 7440.
Yes, the bulb chart lists LED for the brake light, tail light, rear turn signal, center high mount stop light, parking light, daytime running light, and both front and rear side marker lights.
Yes. Trim level, lighting package, market, and body style can change the bulb used in certain positions, so it is important to verify the exact lamp on the vehicle.
Yes. Checking the installed bulb is the safest way to confirm the correct base, size, and fit, especially if the vehicle has been modified or converted to LED bulbs.