
PIAA 19615 9005 (HB3) Xtreme White Plus
$64.57
Buy on Amazon →
Used for: Headlight Bulb High Beam, Daytime Running Light Bulb
Used for: Headlight Bulb Low Beam(C SRT8, with halogen headlights)
Used for: Headlight Bulb Low Beam(C SRT8, with HID headlights)
Used for: Headlight Bulb Low Beam(LX)
Used for: Back Up Reverse Light Bulb, Turn Signal Light Bulb Rear(LX)
Used for: Brake Light Bulb, Tail Light Bulb
Used for: License Plate Light Bulb
Used for: License Plate Light Bulb
Used for: License Plate Light Bulb(C SRT8), Side Marker Light Bulb Front, Courtesy Light Bulb(Compare to original - Option 2), Reading Light Bulb Rear
Used for: License Plate Light Bulb(C SRT8), Side Marker Light Bulb Front, Courtesy Light Bulb(Compare to original - Option 2), Reading Light Bulb Rear
Used for: Parking Light Bulb(Limited, Compare to original - Option 1), Turn Signal Light Bulb Front(C SRT8)
Used for: Parking Light Bulb(Limited, Compare to original - Option 2), Turn Signal Light Bulb Front(LX), Turn Signal Light Bulb Rear(C SRT8)
Used for: Side Marker Light Bulb Rear
Used for: Courtesy Light Bulb(Compare to original - Option 1), Interior Door Light Bulb
Used for: Dome Light Bulb, Map Light Bulb
Used for: Glove Box Light Bulb
Used for: Glove Box Light Bulb
Used for: Trunk or Cargo Area Light
This page for the 2008 Chrysler 300 helps you verify the correct bulb size by lighting position, so you can match the right part before you buy. Because the 300 was offered with different trims and lighting packages, the bulb used for a headlamp, marker, or interior lamp can vary depending on the exact setup.
Use the bulb chart on this year page to compare each location on your vehicle, including low beam, high beam, parking lights, brake lights, reverse lights, license plate lights, and cabin bulbs. That makes it easier to replace a burned-out bulb with the correct fit the first time.
Fitment can change by trim, package, market, and body style, so always compare your installed bulb to the listing for your position before ordering. This is especially important on the 2008 Chrysler 300 because some models use halogen bulbs while others use HID or different SRT8-specific lamps. If you are upgrading to aftermarket LED bulbs or converting from halogen to LED, make sure the bulb base, length, and polarity are correct, and confirm that the new bulb will work with your housing and any factory electronics. When possible, remove the old bulb and check the number printed on it before purchase.
The low beam bulb size for the LX is 9006.
The SRT8 with HID headlights uses D1S low beam bulbs.
The halogen-equipped SRT8 uses 9006XS low beam bulbs.
The high beam bulb size is 9005.
The daytime running light bulb is 9005.
Front turn signal sizes vary by trim: LX uses 3757A, while SRT8 uses 3157A.
Rear turn signal sizes vary by trim: LX uses 3057, and SRT8 uses 3757A.
The brake light bulb is 3057R.
The tail light bulb is 3057R.
The back up reverse light bulb is 3057.
The standard license plate light uses 168 or 917, while the C SRT8 listing shows 2825 or 98 for the license plate light.
Both the dome light and map light use 578 bulbs.
The glove box light bulb is 194 or 7441.
Yes. Trim and lighting package can change the correct bulb, especially for SRT8, Limited, and LX configurations.