
Marsauto M1C H11 LED Fog Light Bulbs, 30000LM 6000K Cool ...
$17.99
Buy on Amazon →
Used for: Fog Light Bulb Front
Used for: Fog Light Bulb Front
Used for: Headlight Bulb High Beam and Low Beam(with halogen headlights)
Used for: Headlight Bulb High Beam and Low Beam(with HID headlights)
Used for: Back Up Reverse Light Bulb
Used for: License Plate Light Bulb, Courtesy Light Bulb, Map Light Bulb
Used for: License Plate Light Bulb, Courtesy Light Bulb, Map Light Bulb
Used for: Parking Light Bulb, Turn Signal Light Bulb Front
Used for: Side Marker Light Bulb Front
Used for: Turn Signal Light Bulb Rear
This 2013 Ford Explorer bulb size guide helps you verify the correct bulbs by lighting position, so you can match the right replacement to each lamp on the vehicle. Whether you are replacing a headlight, interior bulb, turn signal, or cargo light, checking the bulb chart by location is the easiest way to avoid ordering the wrong part.
The 2013 Ford Explorer uses different bulb types depending on the lighting position and, in some cases, the headlight setup. This page covers common exterior and interior bulb locations for the Explorer and is designed to make bulb fitment faster and simpler for maintenance, repairs, or upgrades.
Fitment can vary by trim, lighting package, market, and body style, so it is smart to confirm the installed bulb before buying replacements. The 2013 Explorer may use halogen headlights on some models and HID headlights on others, and those setups do not use the same headlight bulb type. LED conversions can also change fitment, beam pattern, or warning behavior, especially in fog lights and exterior signal lamps. For the best results, compare the bulb in the vehicle with the chart, check the connector style, and make sure the replacement matches both the socket and the lighting function before purchase.
For 2013 Ford Explorer models with halogen headlights, the high beam and low beam bulb is listed as 9005.
For 2013 Ford Explorer models with HID headlights, the high beam and low beam bulb is listed as D3S.
The rear turn signal light bulb is listed as 7440A.
The front turn signal light bulb is listed as 3457.
The parking light bulb is listed as 3457, and the page notes that this position may be optional depending on the vehicle setup.
The back up reverse light bulb is listed as 7440.
The front fog light bulb is listed as H11 LED or H16 LED, depending on the exact fitment and configuration.
The front side marker light bulb is listed as 194NA.
The license plate light bulb is listed as 168 or 917.
The map light bulb and courtesy light bulb are both listed as 168 or 917.
The dome light bulb and trunk or cargo area light are listed as LED on this page, so the exact replacement may depend on the factory lamp assembly.
On this page, both the brake light bulb and tail light bulb are listed as LED, but the exact replacement can depend on the lamp assembly and trim.
Yes. Trim level, lighting package, market, and body style can change bulb fitment, especially for headlights, fog lights, and interior lamps.
Yes. Checking the installed bulb is the best way to confirm fitment, especially if your Explorer has a different lighting package or an aftermarket conversion.