
Marsauto M1C H11 LED Fog Light Bulbs, 30000LM 6000K Cool ...
$17.99
Buy on Amazon →
Used for: Fog Light Bulb Front
Used for: Fog Light Bulb Front
Used for: Headlight Bulb High Beam and Low Beam(with halogen headlights)
Used for: Headlight Bulb High Beam and Low Beam(with HID headlights)
Used for: Back Up Reverse Light Bulb
Used for: License Plate Light Bulb, Courtesy Light Bulb, Map Light Bulb
Used for: License Plate Light Bulb, Courtesy Light Bulb, Map Light Bulb
Used for: Parking Light Bulb, Turn Signal Light Bulb Front
Used for: Side Marker Light Bulb Front
Used for: Turn Signal Light Bulb Rear
Looking for the right bulbs for your 2014 Ford Explorer? This page is organized by lighting position so you can quickly verify the bulb size for each exterior and interior light before you buy. That makes it easier to match the correct replacement for headlights, tail lights, license plate lights, cargo lights, and more.
The 2014 Ford Explorer can use different bulb types depending on trim, lighting package, market, and whether the vehicle has halogen or HID headlights. Use the bulb chart on this page to compare each light location with the correct bulb size and avoid ordering the wrong part.
For best fitment, always confirm your Explorer’s trim and headlight setup before purchasing. Some models use halogen headlight bulbs, while others use HID bulbs, and certain fog light or exterior lamp setups may differ with package options or body style. If you are switching to aftermarket LED replacements, check that the bulb is compatible with your housing and that the beam pattern still works properly. When possible, remove the installed bulb and compare it to the replacement before ordering, especially for position-sensitive bulbs like front turn signals, parking lights, and fog lights.
For 2014 Ford Explorer models with halogen headlights, the high beam and low beam bulb size is 9005.
For 2014 Ford Explorer models equipped with HID headlights, the high beam and low beam bulb size is D3S.
The rear turn signal bulb size listed for the 2014 Ford Explorer is 7440A.
The back up reverse light bulb size for the 2014 Ford Explorer is 7440.
The front turn signal bulb size is 3457, and the parking light bulb size is also 3457.
The front side marker light bulb size listed for the 2014 Ford Explorer is 194NA.
The rear side marker light bulb is listed as LED on this page, so the exact replacement depends on the specific lamp design and package. Check the installed bulb or housing before ordering.
The license plate light bulb size for the 2014 Ford Explorer is 168 or 917.
The map light bulb and courtesy light bulb sizes are listed as 168 or 917.
The dome light bulb and trunk or cargo area light are listed as LED on this page, so verify the installed setup before replacing them.
No. These lighting positions are listed as LED on this page, and trim or market differences can affect the exact lamp assembly. Always confirm the specific vehicle configuration before purchase.
The front fog light bulb options listed for the 2014 Ford Explorer are H11 LED and H16 LED, depending on the vehicle setup.
Because the 2014 Ford Explorer can vary by trim, lighting package, market, and headlight type, checking the installed bulb helps confirm the exact fit and reduces the chance of ordering the wrong part.