PIAA 19615 9005 (HB3) Xtreme White Plus
$64.57
Buy on Amazon →
Ford Explorer 2019 Bulb Size
Bulb size chart
Fog Light Bulb Front - LED
Headlight Bulb High Beam - 9005
Back Up Reverse Light Bulb - 7440
Brake Light Bulb - LED
Center High Mount Stop Light Bulb - LED
Daytime Running Light Bulb - LED
License Plate Light Bulb - 168, 917
Parking Light Bulb - 3757A
Side Marker Light Bulb Front - LED
Side Marker Light Bulb Rear - LED
Tail Light Bulb - LED
Turn Signal Light Bulb Front - 3757A
Turn Signal Light Bulb Rear - 7440A
Dome Light Bulb - LED
Glove Box Light Bulb - 194, 7441
Map Light Bulb - 168, 917
Trunk or Cargo Area Light - LED
9005 Bulbs
Used for: Headlight Bulb High Beam
7440 Bulbs
Used for: Back Up Reverse Light Bulb
168 Bulbs
Used for: License Plate Light Bulb, Map Light Bulb
917 Bulbs
Used for: License Plate Light Bulb, Map Light Bulb
3757A Bulbs
Used for: Parking Light Bulb, Turn Signal Light Bulb Front
7440A Bulbs
Used for: Turn Signal Light Bulb Rear
194 Bulbs
Used for: Glove Box Light Bulb
7441 Bulbs
Used for: Glove Box Light Bulb
The 2019 Ford Explorer uses a mix of LED and halogen bulbs, and the exact fit can depend on trim, lighting package, market, and body style. This page is designed to help you verify bulb sizes by lighting position so you can match the correct replacement before ordering.
Use the bulb chart to check each exterior and interior light location on your Explorer, including headlights, tail lamps, turn signals, reverse lights, license plate lights, and cabin bulbs. Matching the bulb to the correct position is the easiest way to avoid buying the wrong part.
For the best fitment results, compare this page with the bulb already installed in your 2019 Ford Explorer, especially if your vehicle has factory LED lighting or an optional package. Some trims may use different assemblies or bulb types, and aftermarket LED conversions can change the original bulb requirements. If you are replacing a halogen bulb, make sure the new bulb matches the socket and electrical setup, and confirm whether any load resistors or adapters are needed for an LED swap. When in doubt, remove the old bulb and check the part number or base style before purchasing.
FAQ
What bulb does the 2019 Ford Explorer use for the high beam headlight?
The listed high beam headlight bulb for the 2019 Ford Explorer is 9005.
Are the fog lights on the 2019 Ford Explorer LED?
Yes. The fog light bulb front is listed as LED on this page.
What is the rear turn signal bulb size for a 2019 Ford Explorer?
The rear turn signal light bulb is listed as 7440A.
What bulb is used for the front turn signal on this Explorer?
The front turn signal light bulb is listed as 3757A.
What bulb fits the backup reverse light?
The back up reverse light bulb is listed as 7440.
What bulb does the license plate light use?
The license plate light bulb is listed as 168, 917.
What bulb size is used for the map lights?
The map light bulb is listed as 168, 917.
What bulb fits the glove box light?
The glove box light bulb is listed as 194, 7441.
Are the brake lights and tail lights on the 2019 Ford Explorer LED?
Yes. The brake light bulb and tail light bulb are both listed as LED.
Does this page cover interior lights like the dome light and cargo light?
Yes. The dome light bulb and trunk or cargo area light are both listed as LED.
Can trim level change the bulb size on a 2019 Ford Explorer?
Yes. Trim, lighting package, market, and body style can affect bulb fitment, so always verify the exact position on your vehicle.
Should I check the installed bulb before buying a replacement?
Yes. Checking the installed bulb is the safest way to confirm the correct fit, especially if your Explorer has been modified or converted to LED.