
Marsauto M1C H11 LED Fog Light Bulbs, 30000LM 6000K Cool ...
$17.99
Buy on Amazon →
Used for: Fog Light Bulb Front
Used for: Fog Light Bulb Front
Used for: Headlight Bulb High Beam and Low Beam(with halogen headlights)
Used for: Headlight Bulb High Beam and Low Beam(with HID headlights)
Used for: Back Up Reverse Light Bulb
Used for: License Plate Light Bulb, Courtesy Light Bulb, Map Light Bulb
Used for: License Plate Light Bulb, Courtesy Light Bulb, Map Light Bulb
Used for: Parking Light Bulb, Turn Signal Light Bulb Front
Used for: Side Marker Light Bulb Front
Used for: Turn Signal Light Bulb Rear
This page helps you verify bulb sizes for the 2015 Ford Explorer by lighting position, so you can match the correct replacement to each exterior and interior lamp. Because trim level, lighting package, and market can change the setup, it is best to confirm the exact bulb type for the specific light you are replacing before ordering.
For the 2015 Ford Explorer, the chart includes common fitments such as 9005 bulbs for halogen high and low beam headlights, D3S bulbs for HID headlight setups, 7440 bulbs for the rear reverse light, and several LED positions for cabin and rear lighting. Use the position-based list to narrow down the right bulb quickly and avoid buying the wrong part.
Fitment can vary between trims and packages, especially on models with halogen headlights versus HID headlights or with different factory lighting options. If your Explorer has been modified with aftermarket LED bulbs or conversion kits, the installed bulb may not match the original factory specification, so check the bulb currently in the vehicle before purchase. When replacing exterior lighting, make sure the new bulb matches both the socket type and the beam pattern needs of the housing, since some LED upgrades may fit physically but still perform poorly if the optics were designed for halogen. For the most reliable result, compare the bulb in your vehicle with the chart and confirm the exact position, since the same year can use different bulbs depending on trim and equipment.
For 2015 Ford Explorer models with halogen headlights, the chart lists 9005 bulbs for the high beam and low beam headlight positions.
If your 2015 Ford Explorer is equipped with HID headlights, the chart lists D3S bulbs for the high beam and low beam headlight positions.
The rear turn signal light bulb is listed as 7440A for the 2015 Ford Explorer.
The back up reverse light bulb is listed as 7440 on the 2015 Ford Explorer.
The front turn signal light bulb is listed as 3457, and the parking light bulb is also listed as 3457 for the 2015 Ford Explorer.
The front side marker light bulb is listed as 194NA on the 2015 Ford Explorer.
The rear side marker light bulb is listed as LED on this page, so the exact replacement should be matched to the factory LED setup for the rear side marker position.
The license plate light bulb sizes listed for the 2015 Ford Explorer are 168 and 917.
The map light bulb and courtesy light bulb are both listed as 168 and 917 for the 2015 Ford Explorer.
The front fog light bulb is listed as H11 LED or H16 LED, depending on the lighting setup shown for the vehicle.
No. The chart lists those positions as LED, but each location is a separate bulb position and should be matched individually to the vehicle's factory setup.
Because the 2015 Ford Explorer can use different bulbs depending on trim, body style, and lighting package, especially for headlights and some LED-equipped positions. Checking the exact installed bulb helps confirm the correct replacement.
You may be able to use aftermarket LED conversions in some positions, but fitment and performance depend on the housing, socket, and local regulations. Always verify the bulb type and make sure the replacement works properly in the original headlight or fog light housing.
Check the exact light position, confirm whether your vehicle has halogen or HID headlights, and compare the installed bulb to the chart. This is the safest way to avoid ordering the wrong bulb for your 2015 Ford Explorer.