
PIAA 19615 9005 (HB3) Xtreme White Plus
$64.57
Buy on Amazon →
Used for: Headlight Bulb High Beam
Used for: Back Up Reverse Light Bulb
Used for: License Plate Light Bulb, Map Light Bulb
Used for: License Plate Light Bulb, Map Light Bulb
Used for: Parking Light Bulb, Turn Signal Light Bulb Front
Used for: Turn Signal Light Bulb Rear
Used for: Glove Box Light Bulb
Used for: Glove Box Light Bulb
The 2016 Ford Explorer uses different bulbs depending on the lighting position, and this page is designed to help you verify the correct bulb size before you buy. Whether you are replacing an exterior signal light, a cabin lamp, or a license plate bulb, matching the bulb to the exact location is the easiest way to avoid fitment mistakes.
Because trim level, lighting package, market, and body style can change the setup, the safest approach is to check the bulb chart by position rather than assuming one bulb fits every light on the vehicle. This is especially useful on the 2016 Explorer, where some lamps use LED assemblies and others use replaceable bulbs such as 9005, 7440, 7440A, 3757A, 168/917, or 194/7441.
For best results, compare the bulb in your vehicle with the listing before ordering, especially if your Explorer has been modified or has an aftermarket lighting conversion. Some positions on this model are LED-based, while others may use halogen-style replaceable bulbs depending on trim and equipment. If you are upgrading from halogen to LED, make sure the new bulb matches the socket, polarity, and available space inside the housing. When possible, inspect the installed bulb first, since the same year and model can still vary by trim package or market.
The high beam headlight bulb is listed as 9005 for the 2016 Ford Explorer.
The low beam headlight position is listed as LED on this page, so it is not shown as a standard replaceable halogen bulb.
The front turn signal light bulb is 3757A.
The rear turn signal light bulb is 7440A.
The back-up reverse light bulb is 7440.
The license plate light bulb is listed as 168 or 917.
The map light bulb is listed as 168 or 917.
The glove box light bulb is listed as 194 or 7441.
Yes, the tail light bulb and brake light bulb are listed as LED on this page.
Yes, both the center high mount stop light and the daytime running light bulb are listed as LED.
Yes. Trim and lighting package can vary by market and body style, so bulb fitment may differ in some positions.
Yes. Checking the installed bulb is the best way to confirm fitment, especially if the vehicle has been repaired, modified, or fitted with aftermarket lighting.
You can often convert some positions to LED aftermarket bulbs, but the bulb must fit the socket and work correctly with the housing and electrical system.
The parking light bulb is listed as 3757A.