
PIAA 19615 9005 (HB3) Xtreme White Plus
$64.57
Buy on Amazon →
Used for: Headlight Bulb High Beam
Used for: Headlight Bulb Low Beam
Used for: Back Up Light Bulb(Sedan)
Used for: Back Up Light Bulb(Wagon)
Used for: Brake Light Bulb(Sedan), Tail Light Bulb(Sedan)
Used for: Brake Light Bulb(Wagon), Tail Light Bulb(Wagon)
Used for: Center High Mount Stop Light Bulb
Used for: Center High Mount Stop Light Bulb(Wagon), Trunk or Cargo Area Light(Wagon)
Used for: License Plate Light Bulb
Used for: License Plate Light Bulb
Used for: Parking Light Bulb, Side Marker Light Bulb Front, Turn Signal Light Bulb Front(Compare to original - Option 2)
Used for: Turn Signal Light Bulb Front(Compare to original - Option 1)
Used for: Turn Signal Light Bulb Rear(Sedan)
Used for: Turn Signal Light Bulb Rear(Wagon)
Used for: Courtesy Light Bulb(Compare to original - Option 1)
Used for: Courtesy Light Bulb(Compare to original - Option 1)
Used for: Courtesy Light Bulb(Compare to original - Option 2)
Used for: Dome Light Bulb, Map Light Bulb
Used for: Trunk or Cargo Area Light(Sedan)
Used for: Trunk or Cargo Area Light(Sedan)
This page for the 2000 Subaru Outback helps you verify bulb sizes by lighting position, so you can match the right bulb before you buy. Because Subaru used different bulb types depending on the lamp location, body style, and equipment, it is important to check the exact position on the vehicle instead of assuming one bulb fits every socket.
For the 2000 Subaru Outback, the chart below covers common exterior and interior bulbs such as the low beam, high beam, parking light, license plate light, dome light, map light, and rear signal or brake bulbs. Use it as a quick reference when replacing a burned-out bulb or planning a full lighting refresh on your Outback.
Fitment can vary by trim, lighting package, and whether your Outback is a sedan or wagon, so always confirm the bulb position and compare it with the bulb already installed. Halogen bulbs are the original-style choice for this model, while LED replacements may require different fitment, polarity, or additional parts for proper operation. If you are considering an aftermarket conversion, check beam pattern and legality for your local roads, especially for headlights and signal lamps. The safest approach is to remove the old bulb first and verify the number printed on the base before ordering.
The listed low beam bulb is H1. Check the headlamp housing before ordering, since lighting equipment can vary by market and trim.
The high beam bulb listed for this model is 9005.
The front parking light bulb listed is 1157A.
The front side marker light bulb is also listed as 1157A.
For the sedan, the rear turn signal bulb is listed as 3157. For the wagon, the rear turn signal bulb is listed as 7440.
The sedan brake light bulb is listed as 3157R. The wagon brake light bulb is listed as 1157R.
The sedan tail light bulb is listed as 3157R, while the wagon tail light bulb is listed as 1157R.
The center high mount stop light bulb is listed as 921 for one configuration and 912 for the wagon configuration.
The license plate light bulb is listed as 168 or 917.
Both the dome light and map light are listed as DE3175.
Courtesy light fitment is listed as 194 or 7441 for one option, and DE3021 for the other option.
For the sedan, the trunk or cargo area light is listed as 2825 or 98. For the wagon, it is listed as 912.
The sedan back up light bulb is listed as 3156. The wagon back up light bulb is listed as 1156.
Yes. That is the best way to confirm fitment, especially on a 2000 Subaru Outback where trim and body style can change the correct bulb size.
Yes, many owners do, but LED replacements may need the correct base, polarity, and sometimes extra hardware for proper function. Always verify fit and light output before purchase.