
Marsauto M1C H11 LED Fog Light Bulbs, 30000LM 6000K Cool ...
$17.99
Buy on Amazon →
Used for: Fog Light Bulb Front
Used for: Fog Light Bulb Front
Used for: Headlight Bulb High Beam
Used for: Headlight Bulb Low Beam
Used for: Back Up Light Bulb, Back Up Reverse Light Bulb
Used for: License Plate Light Bulb, Side Marker Light Bulb Rear, Interior Door Light Bulb
Used for: License Plate Light Bulb, Interior Door Light Bulb
Used for: Side Marker Light Bulb Rear
Used for: Turn Signal Light Bulb Front
Used for: Turn Signal Light Bulb Rear
Used for: Dome Light Bulb, Map Light Bulb
Used for: Trunk or Cargo Area Light
This page covers bulb sizes for the 2020 Subaru Outback and is organized by lighting position so you can quickly verify the correct fit before ordering parts. Whether you are replacing a headlight, tail lamp, interior light, or reverse bulb, checking the bulb chart by location helps reduce mistakes and makes it easier to match the right bulb to the right socket.
The 2020 Subaru Outback uses a mix of LED and halogen-style bulb listings depending on the lamp position and equipment level. That means the correct bulb can vary by function, and in some cases by trim or lighting package. Use the chart on this page to compare each exterior and interior light position with the listed bulb size before you buy.
Fitment can vary by trim, package, market, and body style, so it is smart to confirm what is actually installed on your 2020 Outback before purchasing replacements. Some positions are listed with LED equipment, while others may use halogen bulb sizes such as 9005, H11, 921, 168, 7444NA, 7440A, DE3175, or 912 depending on the lamp. If you are considering an aftermarket LED conversion, check beam pattern, polarity, heat management, and local road-use rules, since not every LED retrofit performs the same as the original bulb. When possible, remove the old bulb and compare it directly to the replacement to confirm the base, connector, and physical shape before ordering.
The low beam bulb listing for the 2020 Subaru Outback is H11 on halogen-equipped versions. Some lighting packages may use LED headlamp assemblies instead, so confirm the lamp type on your vehicle before ordering.
The high beam bulb listing is 9005 for halogen-equipped versions. The chart also shows LED headlight equipment for some configurations, so the exact setup can depend on trim or package.
The front fog light listing includes H11 LED and H16 LED. Because fog light equipment can vary, check the installed bulb or the lamp housing label before buying replacements.
The back up reverse light bulb is listed as 921. The chart also shows back up light bulb 921, which points to the same base size for the rear reverse lamp position.
The license plate light bulb is listed as 168 or 917. Either size may appear depending on the specific lamp assembly or market configuration.
The dome light bulb is DE3175. This is an interior bulb size commonly used in overhead cabin lighting.
The map light bulb is also DE3175. If your vehicle has a different interior lighting package, verify the bulb before replacing both sides.
The rear turn signal light bulb is 7440A. This is a separate listing from the front turn signal bulb, so do not assume both ends use the same size.
The front turn signal light bulb is 7444NA. That bulb is specific to the front signal position on the 2020 Subaru Outback.
The trunk or cargo area light uses 912. If your cargo lamp is not working, confirm the bulb style and the socket condition before replacing it.
Yes. The bulb chart shows several LED-equipped positions, including headlight, brake light, parking light, tail light, daytime running light, center high mount stop light, and front side marker light on some configurations.
Because the 2020 Outback uses different bulb sizes for different functions. For example, the low beam, high beam, turn signals, reverse lights, and interior lights all use different bulb types, so checking by position helps avoid ordering the wrong part.