
Marsauto M1C H11 LED Fog Light Bulbs, 30000LM 6000K Cool ...
$17.99
Buy on Amazon →
Used for: Fog Light Bulb Front
Used for: Fog Light Bulb Front
Used for: Headlight Bulb High Beam
Used for: Headlight Bulb Low Beam
Used for: Back Up Reverse Light Bulb
Used for: License Plate Light Bulb, Interior Door Light Bulb
Used for: License Plate Light Bulb, Interior Door Light Bulb
Used for: Side Marker Light Bulb Rear
Used for: Turn Signal Light Bulb Front
Used for: Turn Signal Light Bulb Rear
Used for: Dome Light Bulb, Map Light Bulb
Used for: Trunk or Cargo Area Light
This 2019 Subaru Outback bulb size guide helps you verify the correct bulb by lighting position, so you can replace a failed lamp or upgrade the lighting with more confidence. Because Subaru used different lighting setups depending on trim, package, and market, it is important to match the bulb to the exact location on the vehicle rather than relying on a single all-in-one list.
On this page, you can check common exterior and interior bulb positions for the 2019 Subaru Outback, including headlights, fog lights, turn signals, tail lights, reverse lights, and cabin lamps. Use the bulb chart to compare the installed bulb type with the position you need, which can save time and reduce the chance of ordering the wrong part.
Fitment can vary on the 2019 Outback, especially between trims with halogen lighting and models equipped with factory LED lighting or appearance packages. Some positions may use LED assemblies instead of replaceable bulbs, while others may allow direct bulb replacement or aftermarket LED conversions. Before buying, check the bulb already installed in the vehicle, confirm whether the lamp is halogen or LED, and compare the socket and connector style as well as the bulb number. This is especially important for headlights and fog lights, where different setups can look similar but use different parts.
For halogen-equipped models, the 2019 Subaru Outback low beam headlight bulb is H11. Some trims or lighting packages may use LED headlight assemblies instead of a replaceable halogen bulb.
For halogen-equipped models, the high beam headlight bulb is 9005. If your Outback has factory LED headlights, the high beam may be part of an LED assembly rather than a standard replaceable bulb.
Yes. Some 2019 Subaru Outback models are listed with LED high beam and low beam headlight lighting. Because trim and package differences matter, always verify the exact headlight setup on the vehicle before ordering parts.
The front fog light may use H11 LED or H16 LED, depending on the lighting setup. Check the existing bulb and housing before purchase, since fog light fitment can vary by trim and market.
The front turn signal bulb is 7444NA.
The rear turn signal bulb is 7440A.
The back up reverse light bulb is 921.
The license plate light bulb sizes listed are 168 and 917.
Both the dome light and map light use DE3175 bulbs.
The trunk or cargo area light uses a 912 bulb.
The bulb chart lists LED for the brake light and tail light positions. On LED-equipped vehicles, these may be integrated lighting units rather than simple replaceable bulbs, so confirm the exact rear lamp design before ordering.
Match the bulb to the exact lighting position, then verify the installed bulb number, socket type, and whether the lamp is halogen or LED. This is the safest way to avoid fitment problems on a vehicle where trim and lighting package differences can change the correct bulb.