
Marsauto M1C H11 LED Fog Light Bulbs, 30000LM 6000K Cool ...
$17.99
Buy on Amazon →
Used for: Fog Light Bulb Front
Used for: Fog Light Bulb Front
Used for: Headlight Bulb High Beam
Used for: Headlight Bulb Low Beam
Used for: Back Up Reverse Light Bulb
Used for: License Plate Light Bulb, Interior Door Light Bulb
Used for: License Plate Light Bulb, Interior Door Light Bulb
Used for: Side Marker Light Bulb Rear
Used for: Turn Signal Light Bulb Front
Used for: Turn Signal Light Bulb Rear
Used for: Dome Light Bulb, Map Light Bulb
Used for: Trunk or Cargo Area Light
This page helps you find the right bulb sizes for the 2021 Subaru Outback by lighting position, so you can match the correct bulb before you buy. Because Subaru used different lighting setups depending on trim, market, and body style, it is smart to confirm the exact lamp location first and then compare it with the chart on this page.
For the 2021 Subaru Outback, many exterior lights use LED assemblies, while some positions may still use replaceable bulbs depending on equipment. The bulb listings here are organized to make it easier to verify headlight, tail, brake, turn signal, reverse, license plate, interior, and cargo light fitment without guessing.
Fitment can vary by trim package, lighting package, and whether your Outback has halogen or LED equipment from the factory. That matters especially for headlights and fog lights, since some versions use LED units while others use halogen bulb types, and aftermarket LED conversions may not match the original beam pattern or housing design. Before ordering, check the bulb currently installed in your vehicle, compare the socket and connector style, and confirm whether your model uses a replaceable bulb or a sealed LED module. This is the best way to avoid buying the wrong part and to make sure the replacement works as expected.
The chart lists LED for some low beam headlight setups, and also H11 for low beam on other versions. Your exact fit depends on trim and lighting package, so verify what is installed on your vehicle before purchase.
The chart shows LED for some high beam headlight setups, and 9005 for other versions. Check your existing headlight assembly to confirm whether your Outback uses a replaceable bulb or an LED unit.
The page lists the daytime running light bulb as LED. On many Outback configurations, this means the light is part of an LED assembly rather than a simple plug-in bulb.
The rear turn signal light bulb is listed as 7440A. Make sure to match the rear position specifically, since front turn signal fitment is different.
The front turn signal light bulb is listed as 7444NA. This is different from the rear turn signal bulb, so do not use the same part for both positions unless your vehicle’s lighting has been modified.
The back up reverse light bulb is listed as 921. If your Outback has a different rear lamp setup, confirm the socket and bulb shape before ordering.
The license plate light bulb sizes are listed as 168 and 917. Either may appear depending on the exact lamp design, so it is best to check the bulb already in the vehicle.
The dome light bulb is listed as DE3175. This is a common interior bulb size, but it is still worth confirming against the installed bulb.
The map light bulb is also listed as DE3175. That means the dome and map lights may use the same bulb family, depending on the interior layout.
The front fog light bulb is listed as H11 LED or H16 LED, depending on the setup. Because fog light fitment can vary, check the housing and connector before buying replacements.
The chart lists the brake light bulb and tail light bulb as LED. In many cases, that means the light is an integrated LED unit rather than a standard replaceable bulb.
Check the exact lighting position, trim level, and whether your vehicle has halogen or LED equipment. Then compare the installed bulb or lamp assembly to the chart, since Subaru lighting can vary by market and body style.