
Marsauto M1C H11 LED Fog Light Bulbs, 30000LM 6000K Cool ...
$17.99
Buy on Amazon →
Used for: Fog Light Bulb Front
Used for: Fog Light Bulb Front
Used for: Headlight Bulb High Beam
Used for: Back Up Reverse Light Bulb
Used for: Brake Light Bulb
Used for: License Plate Light Bulb, Parking Light Bulb, Side Marker Light Bulb Front, Side Marker Light Bulb Rear, Tail Light Bulb, Courtesy Light Bulb
Used for: License Plate Light Bulb, Parking Light Bulb, Side Marker Light Bulb Front, Side Marker Light Bulb Rear, Tail Light Bulb, Courtesy Light Bulb
Used for: Turn Signal Light Bulb Front
Used for: Turn Signal Light Bulb Rear
Used for: Dome Light Bulb, Map Light Bulb
Used for: Trunk or Cargo Area Light
This 2012 Subaru Outback bulb size page helps you verify the correct bulbs by lighting position, so you can replace a failed lamp without guessing. Whether you are changing a headlight, interior light, or a rear signal bulb, the goal is to match the bulb to the exact socket location on your Outback.
Bulb fitment can vary by trim, lighting package, market, and body style, so it is smart to use the position-specific chart before buying parts. For the 2012 Subaru Outback, the listed bulb sizes cover common exterior and interior lights such as high beam, reverse, fog, map, dome, license plate, and cargo area bulbs.
For best fitment, compare the chart with the bulb already installed in your vehicle, especially if your Outback has been modified or uses an aftermarket lighting setup. Some positions may use halogen bulbs from the factory, while others may have been converted to LED by a previous owner, and that can affect brightness, beam pattern, and connector compatibility. If you are considering LED replacements or other aftermarket conversions, make sure the bulb shape, base, and polarity are correct for the socket, and check local rules for road use. When in doubt, remove the old bulb and confirm the number printed on the base before ordering.
The listed high beam headlight bulb size for the 2012 Subaru Outback is 9005.
The back up reverse light bulb size listed for the 2012 Subaru Outback is 921.
The front turn signal light bulb size listed is 7440.
The rear turn signal light bulb size listed for this model is 7440A.
Both the dome light and map light use DE3175 bulbs on the 2012 Subaru Outback.
The license plate light bulb size listed is 2825, 98.
The parking light bulb size listed for the 2012 Subaru Outback is 2825, 98.
The tail light bulb size listed is 2825, 98.
Both the front side marker light and rear side marker light use 2825, 98 bulbs.
The courtesy light bulb size listed for this Outback is 2825, 98.
The front fog light bulb listing is H11 LED or H16 LED, depending on the lighting setup and fitment.
The trunk or cargo area light uses a 912 bulb.
The brake light bulb size listed is 7440R.
The chart lists the center high mount stop light as LED, which usually means the assembly is LED rather than a standard replaceable bulb.
Because trim and lighting package differences can change fitment, and a previous owner may have installed a different bulb type. Checking the installed bulb helps confirm the exact match before you order.