
PIAA 19615 9005 (HB3) Xtreme White Plus
$64.57
Buy on Amazon →
Used for: Headlight Bulb High Beam, Daytime Running Light Bulb
Used for: Headlight Bulb Low Beam
Used for: Back Up Reverse Light Bulb
Used for: Brake Light Bulb, Tail Light Bulb Outer
Used for: License Plate Light Bulb, Map Light Bulb
Used for: License Plate Light Bulb, Map Light Bulb
Used for: Parking Light Bulb, Turn Signal Light Bulb Front
Used for: Side Marker Light Bulb Front
Used for: Side Marker Light Bulb Rear
Used for: Tail Light Bulb Inner, Interior Door Light Bulb
Used for: Tail Light Bulb Inner, Interior Door Light Bulb
Used for: Turn Signal Light Bulb Rear
Used for: Trunk or Cargo Area Light
This 2006 Toyota Sienna bulb size guide helps you verify the correct bulbs by lighting position, so you can replace a failed lamp without guessing. Whether you are changing a headlight, brake light, reverse light, or interior bulb, using the right fitment makes the job faster and helps avoid returns.
Because trim level, market, and body style can affect lighting equipment, it is smart to match the bulb to the exact location on the vehicle. Use this page as a quick reference for the 2006 Sienna and compare the listed bulb type with the bulb currently installed before you buy.
For the best fitment results, check whether your 2006 Sienna uses standard halogen lighting or an aftermarket LED or HID conversion, since those changes can affect bulb compatibility and beam pattern. Some positions may also differ by trim package or regional market, especially for exterior lamps and rear lighting. If you are unsure, remove the old bulb and read the number printed on the base before ordering. This is especially helpful for bulbs such as the D2R low beam, 9005 high beam, 9005 daytime running light, 921 reverse light, 3457A front parking and turn signal bulbs, 7443R outer tail and brake bulbs, and the smaller interior and license plate bulbs.
The low beam headlight bulb listed for the 2006 Toyota Sienna is D2R. This is important to confirm before purchase because low beam fitment can differ from the high beam bulb.
The 2006 Toyota Sienna uses a 9005 bulb for the high beam headlights.
The daytime running light bulb listed for the 2006 Toyota Sienna is 9005.
The back up reverse light bulb size is 921.
The brake light bulb listed for the 2006 Toyota Sienna is 7443R.
The outer tail light bulb size is 7443R, which matches the brake light bulb listing on this page.
The inner tail light bulb listed for the 2006 Toyota Sienna is 194, 7441.
The front turn signal bulb size is 3457A.
The rear turn signal bulb size is 7440.
The front side marker light bulb size is 168NA.
The rear side marker light bulb size is 7443A.
The license plate light bulb sizes listed for the 2006 Toyota Sienna are 168 and 917.
The map light bulb sizes are 168 and 917, while the interior door light bulb sizes are 194 and 7441.
The trunk or cargo area light bulb listed for this Sienna is DE3022.
Not always. Trim level, lighting package, market, and body style can change the bulb setup, so it is best to verify the exact bulb position on your vehicle before ordering.