
Marsauto M1C H11 LED Fog Light Bulbs, 30000LM 6000K Cool ...
$17.99
Buy on Amazon →
Used for: Fog Light Bulb Front
Used for: Fog Light Bulb Front
Used for: Headlight Bulb High Beam, Daytime Running Light Bulb
Used for: Headlight Bulb Low Beam(with halogen headlights)
Used for: Headlight Bulb Low Beam(with HID headlights)
Used for: Back Up Reverse Light Bulb
Used for: License Plate Light Bulb, Tail Light Bulb
Used for: License Plate Light Bulb, Tail Light Bulb
Used for: Parking Light Bulb, Side Marker Light Bulb Front, Turn Signal Light Bulb Front
Used for: Turn Signal Light Bulb Rear
Used for: Dome Light Bulb, Interior Door Light Bulb, Map Light Bulb
Used for: Dome Light Bulb, Interior Door Light Bulb, Map Light Bulb
Used for: Door Mirror Illumination Light Bulb
Used for: Trunk or Cargo Area Light
This 2012 Toyota Sienna bulb size guide helps you verify the correct bulb by lighting position, so you can replace the right lamp the first time. Whether you are changing a headlight, tail light, interior bulb, or license plate light, this page organizes the common bulb types used on the 2012 Sienna in a simple, model-specific format.
The 2012 Toyota Sienna uses different bulb sizes depending on the light location and the headlight setup. Some trims use halogen low beams, while others may use HID low beams, and exterior lighting can also vary by market and body style. Checking the bulb position before ordering is the best way to avoid buying the wrong part.
For fitment, always compare your Sienna’s trim, lighting package, and headlight type before purchasing replacement bulbs. The 2012 Sienna may use halogen or HID low beams, and some fog light or interior applications can differ if the vehicle has been converted to LED or fitted with aftermarket housings. If you are unsure, remove the installed bulb and match the base and connector style before buying, especially for exterior lamps where a close-looking bulb may still not fit correctly.
A 2012 Toyota Sienna with halogen headlights uses an H11 low beam bulb.
A 2012 Toyota Sienna with HID headlights uses a D4S low beam bulb.
The high beam bulb is 9005.
The daytime running light bulb is 9005.
The front fog light bulb may be H11 LED or H16 LED, depending on the vehicle’s setup.
The front turn signal light bulb is 3457A.
The rear turn signal light bulb is 7440A.
Both the parking light and front side marker light use 3457A.
The rear side marker light bulb is LED on this page’s bulb chart.
The back up reverse light bulb is 921.
The license plate light bulb sizes listed are 168 and 917.
The tail light bulb sizes listed are 168 and 917.
The center high mount stop light uses an LED bulb on this page’s chart.
The brake light bulb is listed as LED.
The dome light, map light, and interior door light all use 2825 or 98 bulbs.
The trunk or cargo area light uses a DE3022 bulb.
The door mirror illumination light bulb is 2886X.
Yes. Trim, lighting package, body style, and market can affect bulb fitment, so it is important to confirm the exact bulb position and headlight type before ordering.