
Marsauto M1C H11 LED Fog Light Bulbs, 30000LM 6000K Cool ...
$17.99
Buy on Amazon →
Used for: Fog Light Bulb Front
Used for: Fog Light Bulb Front
Used for: Headlight Bulb High Beam, Daytime Running Light Bulb(L)
Used for: Headlight Bulb Low Beam(L)
Used for: Headlight Bulb Low Beam(Limited)
Used for: Back Up Reverse Light Bulb
Used for: Brake Light Bulb, Tail Light Bulb Outer
Used for: License Plate Light Bulb, Tail Light Bulb Inner(Inner)
Used for: License Plate Light Bulb, Tail Light Bulb Inner(Inner)
Used for: Parking Light Bulb, Turn Signal Light Bulb Front
Used for: Parking Light Bulb(L), Side Marker Light Bulb Front(with LED headlights), Turn Signal Light Bulb Front(L)
Used for: Side Marker Light Bulb Front(with halogen headlights)
Used for: Turn Signal Light Bulb Rear
Used for: Dome Light Bulb, Map Light Bulb
Used for: Dome Light Bulb, Map Light Bulb
Used for: Door Mirror Illumination Light Bulb
Used for: Interior Door Light Bulb
Used for: Interior Door Light Bulb
Used for: Trunk or Cargo Area Light
Used for: Vanity Mirror Light Bulb
This 2016 Toyota Sienna bulb size guide helps you verify the correct bulbs by lighting position, so you can replace the right lamp the first time. Because the Sienna can use different headlight and exterior lighting setups, checking the exact position on the vehicle matters just as much as the model year.
Use this page to match common bulb locations such as low beam, high beam, brake light, reverse light, license plate light, dome light, and turn signal bulbs. The 2016 Toyota Sienna may use different bulb types depending on trim, package, and lighting equipment, so the chart is organized to make fitment easier to confirm.
For best results, compare the bulb in your van before ordering, especially if your Sienna has halogen headlights, LED headlights, or a Limited trim with different low beam hardware. Some positions can also vary by market and body style, and aftermarket LED conversions may require a different bulb style or additional adapters. If a light has already been modified, the installed bulb may not match the original factory specification, so checking the current bulb is the safest way to avoid a mismatch.
Most 2016 Toyota Sienna models use H11 low beam bulbs on the left side listing shown here. Limited models may use D4S low beam bulbs instead, so trim and headlight package should be verified before purchase.
The high beam bulb listed for this vehicle is 9005. This is the common fitment for the high beam position on the 2016 Toyota Sienna.
The front turn signal bulb is listed as 7444NA. Some front lighting setups also share the same bulb type for the parking light position.
The rear turn signal bulb is 7440A. This is the fitment shown for the rear turn signal position on the 2016 Toyota Sienna.
The back up reverse light bulb is 921. If only one reverse lamp is out, it is still a good idea to compare both sides and replace as needed.
The license plate light bulb sizes listed are 168 and 917. Either size may appear depending on the exact lamp assembly used.
The brake light bulb and outer tail light bulb are both listed as 7443R. That makes it easier to match the rear lamp functions on this model.
The dome light bulb and map light bulb are listed as 2825 and 98. These are common interior bulb sizes for the overhead lamps.
The vanity mirror light bulb is 7065. This bulb is used in the visor mirror lamp position.
The front fog light bulb can be H11 LED or H16 LED, depending on the setup. Because fog light equipment can vary, it is best to confirm the bulb already installed before ordering.
No. Some trims use halogen headlight bulbs such as H11 low beam and 9005 high beam, while Limited models may use D4S low beams. Lighting package differences can change the correct bulb size.
The 2016 Toyota Sienna can have different bulb types based on trim, lighting package, and whether the vehicle has halogen or LED headlights. That is why the page lists bulb sizes by exact lighting position instead of one universal size.
Yes, many owners upgrade to LED bulbs, but the replacement should match the socket and fit the housing correctly. Some positions may need LED-specific bulbs or additional compatibility checks to avoid warning lights, glare, or poor beam pattern.
Check the installed bulb, confirm the lighting position, and verify whether your Sienna has halogen or LED equipment. This is especially important for the 2016 Toyota Sienna because trim and package differences can change the correct bulb size.