
Marsauto M1C H11 LED Fog Light Bulbs, 30000LM 6000K Cool ...
$17.99
Buy on Amazon →
Used for: Fog Light Bulb Front
Used for: Fog Light Bulb Front
Used for: Headlight Bulb High Beam, Daytime Running Light Bulb
Used for: Headlight Bulb Low Beam(with halogen headlights)
Used for: Headlight Bulb Low Beam(with HID headlights)
Used for: Back Up Reverse Light Bulb
Used for: License Plate Light Bulb, Tail Light Bulb
Used for: License Plate Light Bulb, Tail Light Bulb
Used for: Parking Light Bulb, Side Marker Light Bulb Front, Turn Signal Light Bulb Front
Used for: Turn Signal Light Bulb Rear
Used for: Dome Light Bulb, Interior Door Light Bulb, Map Light Bulb
Used for: Dome Light Bulb, Interior Door Light Bulb, Map Light Bulb
Used for: Door Mirror Illumination Light Bulb
Used for: Trunk or Cargo Area Light
This 2013 Toyota Sienna bulb size page is designed to help you verify the correct bulb by lighting position before you buy replacement parts. Because the Sienna could be equipped with different trim levels, lighting packages, and headlight types, the bulb used in one area may not match another version of the same van.
Use this guide as a quick reference for exterior and interior lighting on the 2013 Toyota Sienna, including headlights, turn signals, brake lights, reverse lights, license plate lights, dome lights, and cargo-area lighting. Matching the bulb to the exact location is the easiest way to avoid fitment mistakes.
For the best fit, always compare your Sienna’s trim and lighting setup with the bulb chart before ordering. Some 2013 Sienna models use halogen low beams with H11 bulbs, while others use HID low beams with D4S bulbs, and fog light setups can also vary with H11 LED or H16 LED options. If you are considering aftermarket LED or HID conversions, make sure the bulb base, housing depth, and beam pattern are compatible with your vehicle. The safest approach is to check the bulb already installed in the van, especially if the vehicle has been modified or if you are unsure whether it has factory halogen or HID headlights.
2013 Toyota Sienna models with halogen headlights use H11 low beam bulbs.
Models equipped with HID headlights use D4S low beam bulbs.
The high beam headlight bulb size is 9005.
The daytime running light bulb size is 9005.
The front turn signal light bulb size is 3457A.
Both the parking light and the front side marker light use 3457A bulbs.
The rear turn signal light bulb size is 7440A.
The back up reverse light bulb size is 921.
The license plate light bulb sizes listed for the 2013 Toyota Sienna are 168 and 917.
The tail light bulb sizes listed are 168 and 917.
Both the center high mount stop light and brake light are listed as LED on this page.
Front fog light fitment can vary, and the listed options are H11 LED or H16 LED.
The dome light, map light, and interior door light are listed with 2825 and 98 bulb sizes.
The trunk or cargo area light uses a DE3022 bulb.
Because trim level, market, body style, and lighting package can change the bulb type, checking the installed bulb helps confirm the exact fit before purchase.