
Marsauto M1C H11 LED Fog Light Bulbs, 30000LM 6000K Cool ...
$17.99
Buy on Amazon →
Used for: Fog Light Bulb Front
Used for: Fog Light Bulb Front
Used for: Headlight Bulb High Beam
Used for: Headlight Bulb Low Beam
Used for: Back Up Reverse Light Bulb
Used for: Daytime Running Light Bulb
Used for: License Plate Light Bulb
Used for: License Plate Light Bulb
Used for: Parking Light Bulb, Side Marker Light Bulb Front
Used for: Parking Light Bulb, Side Marker Light Bulb Front
Used for: Side Marker Light Bulb Rear
Used for: Turn Signal Light Bulb Front, Turn Signal Light Bulb Rear
Used for: Dome Light Bulb, Map Light Bulb, Trunk or Cargo Area Light
Used for: Glove Box Light Bulb
This 2011 Mitsubishi Outlander bulb size guide helps you verify the correct bulbs by lighting position, so you can replace a failed lamp without guessing. Use it to match the bulb type for the headlamps, tail lamps, interior lights, license plate lights, and other exterior and cabin locations on your vehicle.
Because bulb fitment can change with trim, market, and lighting package, it is smart to confirm the exact position before ordering. The same 2011 Mitsubishi Outlander may use different bulb types for the low beam, high beam, fog lights, and daytime running lights depending on how it was equipped from the factory.
For the best fit, compare the bulb listed for your specific light socket with the bulb already installed in your Outlander. Trim differences, halogen versus LED setups, and aftermarket conversions can all affect compatibility. If your vehicle has been modified, do not assume the factory bulb chart still applies exactly. Checking the old bulb, the housing, and the connector before purchase is the safest way to avoid returns and ensure the replacement works correctly.
The low beam headlight bulb listed for this model is D2S. This applies to the factory low beam setup shown on the bulb chart for the 2011 Mitsubishi Outlander.
The high beam headlight bulb is 9005. If only one side is out, replace the matching high beam bulb on that side and compare the old bulb first.
The front turn signal light bulb is 7440A. This is the bulb type shown for the front turn signal position on the 2011 Mitsubishi Outlander.
The rear turn signal light bulb is also 7440A. Even though the front and rear signal bulbs match on this page, always verify the socket and lens before buying.
The brake light bulb is listed as LED. Since the chart does not provide a separate bulb number, use the exact LED replacement specified for the brake light position on your vehicle.
The center high mount stop light bulb is listed as LED. Check the assembly carefully, because some LED units are serviced differently than standard replaceable bulbs.
The tail light bulb is listed as LED. Because LED tail lamps can vary by trim or market, confirm the exact lamp style before ordering replacement parts.
The license plate light bulb can be 168 or 917. Either bulb type may be listed for this position, so match the one used in your specific license plate lamp housing.
The front fog light bulb is listed as H11 LED or H16 LED. Which one applies can depend on the exact trim or lighting package, so verify the installed bulb before purchase.
The daytime running light bulb is 1156. If your Outlander has a different lighting package or an LED conversion, check the installed bulb to confirm compatibility.
The back up reverse light bulb is 7440. This is the bulb type shown for the reverse lamp position on the 2011 Mitsubishi Outlander.
The dome light bulb, map light bulb, and trunk or cargo area light are all listed as DE3175. These interior positions use the same bulb type on this page.
The glove box light bulb is 2721. It is a small interior bulb, so handle it carefully and confirm the socket style when replacing it.
Yes, the parking light bulb and front side marker light bulb are listed as 2825 or 98. That means the same bulb type is shown for both positions on this page.
Because trim and lighting package differences can change fitment, especially on the 2011 Mitsubishi Outlander. Checking the installed bulb helps you avoid ordering the wrong type, especially for LED assemblies, fog lights, and any aftermarket conversions.