
PIAA 19615 9005 (HB3) Xtreme White Plus
$64.57
Buy on Amazon →
Used for: Headlight Bulb High Beam
Used for: Back Up Reverse Light Bulb
Used for: License Plate Light Bulb, Side Marker Light Bulb Front
Used for: License Plate Light Bulb, Side Marker Light Bulb Front
Used for: Turn Signal Light Bulb Front
Used for: Turn Signal Light Bulb Rear
Used for: Dome Light Bulb, Map Light Bulb, Trunk or Cargo Area Light
Used for: Glove Box Light Bulb(Compare to original - Option 1)
Used for: Glove Box Light Bulb(Compare to original - Option 2)
This page covers the 2018 Mitsubishi Outlander and helps you verify bulb sizes by lighting position, so you can match the correct replacement to the exact lamp on the vehicle. Because trim level, lighting package, and body style can change the fitment, it is always best to confirm the bulb location before ordering.
For the 2018 Outlander, many exterior and interior lights use LED assemblies, while some positions still rely on replaceable bulbs. The chart below is organized by function, making it easier to find the right bulb for headlights, turn signals, reverse lights, cabin lights, cargo lights, and other specific spots on the vehicle.
Fitment can vary by market and trim, especially on models with different headlight or daytime running light packages. Some 2018 Mitsubishi Outlander versions may use factory LED units in places where other trims use halogen or standard replaceable bulbs, and aftermarket LED conversions can change the bulb type needed as well. Before buying, compare the installed bulb to the chart, check the socket shape and connector style, and confirm whether your vehicle has original halogen equipment or an LED assembly that is not meant to take a separate bulb.
The high beam headlight bulb is 9005 on this page for the 2018 Mitsubishi Outlander.
The front turn signal light bulb is listed as 7507.
The rear turn signal light bulb is 7440A.
The back up reverse light bulb is 921.
The license plate light bulb is listed as 2825, 98.
The front side marker light bulb is 2825, 98.
The dome light bulb, map light bulb, and trunk or cargo area light are all listed as DE3175.
Two glove box bulb references are shown: 2721 for option 1 and 74 for option 2. Check the installed bulb before ordering because the fitment can differ.
This page lists those positions as LED. On some vehicles, that means the light is part of an LED assembly rather than a simple bulb swap, so verify the exact lamp design on your trim.
The chart lists the low beam headlight bulb as LED. However, lighting package differences can affect how the headlamp is built, so confirm whether your vehicle uses a serviceable bulb or a sealed LED unit.
Check the bulb base, length, and socket style, and compare the old bulb to the chart. Interior lighting such as stepwell lights, floor console compartment lights, dome lights, and map lights can vary by trim and package.
Yes, many owners use aftermarket LED conversions, but the bulb must match the socket and the vehicle may need the correct load or beam pattern. For best fitment, confirm the original bulb type first and then choose a compatible replacement.