
PIAA 19615 9005 (HB3) Xtreme White Plus
$64.57
Buy on Amazon →
Used for: Headlight Bulb High Beam
Used for: Back Up Reverse Light Bulb
Used for: License Plate Light Bulb, Side Marker Light Bulb Front
Used for: License Plate Light Bulb, Side Marker Light Bulb Front
Used for: Turn Signal Light Bulb Front
Used for: Turn Signal Light Bulb Rear
Used for: Dome Light Bulb, Map Light Bulb, Trunk or Cargo Area Light
Used for: Glove Box Light Bulb(Compare to original - Option 1)
Used for: Glove Box Light Bulb(Compare to original - Option 2)
This page covers bulb sizes for the 2017 Mitsubishi Outlander and is organized by lighting position so you can verify the correct replacement before you buy. Whether you are changing an exterior signal lamp, a cabin bulb, or a cargo light, matching the bulb to the exact location helps avoid fitment mistakes and returns.
The 2017 Outlander uses a mix of LED and halogen-style bulbs depending on the lamp location, and some positions may vary by trim, market, or body style. Use this guide to compare the bulb type shown for each light on your vehicle, especially if you are replacing a single bulb or upgrading several lights at once.
Fitment can change with trim level, lighting package, and regional specification, so it is smart to confirm what is actually installed on your Outlander before ordering. Some exterior lamps on this model are listed as LED, while others use replaceable bulbs such as 9005, 7507, 921, 7440A, DE3175, 2825/98, 2721, or 74 depending on position. If you are converting a halogen setup to LED aftermarket bulbs, check polarity, bulb depth, heat sink clearance, and whether the new bulb will work properly with the housing and any vehicle electronics. The safest approach is to inspect the original bulb and compare it with the chart on this page before purchase.
The high beam headlight bulb is 9005 on this 2017 Mitsubishi Outlander.
The low beam headlight is listed as LED on this page, so the bulb is not given as a standard replaceable halogen part number here.
The front turn signal bulb is 7507.
The rear turn signal bulb is 7440A.
The back up reverse light bulb is 921.
The license plate light bulb is 2825 or 98.
Yes. Both the dome light and map light use DE3175 bulbs on this page.
The trunk or cargo area light uses a DE3175 bulb.
Two glove box bulb options are shown for comparison: 2721 and 74. Check the installed bulb before ordering, since the correct one can depend on the vehicle configuration.
Not always. Trim level, lighting package, market, and body style can change the bulb setup, especially for LED-equipped exterior lamps.
Usually no, not as a direct swap. LED assemblies and LED-specific lamps are often designed differently from halogen bulb housings, so you should match the original lamp type and verify compatibility before attempting a conversion.
Because some positions on the 2017 Outlander may differ by trim or region, and the same model year can use more than one bulb option in certain locations. Checking the installed bulb helps ensure the replacement matches the actual socket and lamp design.
The parking light bulb is listed as LED, while the front side marker light uses 2825 or 98 and the rear side marker light is listed as LED. That means the bulb type can differ by location.
Make sure the LED bulb matches the socket, fits inside the housing, and works with the vehicle’s electrical system. It is also important to confirm whether the lamp is already LED from the factory, since some positions on the 2017 Outlander are not simple bulb swaps.