
Marsauto M1C H11 LED Fog Light Bulbs, 30000LM 6000K Cool ...
$17.99
Buy on Amazon →
Used for: Fog Light Bulb Front
Used for: Fog Light Bulb Front
Used for: Headlight Bulb High Beam
Used for: Headlight Bulb Low Beam
Used for: Back Up Reverse Light Bulb
Used for: Daytime Running Light Bulb
Used for: License Plate Light Bulb
Used for: License Plate Light Bulb
Used for: Parking Light Bulb, Side Marker Light Bulb Front
Used for: Parking Light Bulb, Side Marker Light Bulb Front
Used for: Side Marker Light Bulb Rear
Used for: Turn Signal Light Bulb Front, Turn Signal Light Bulb Rear
Used for: Dome Light Bulb, Map Light Bulb, Trunk or Cargo Area Light
Used for: Glove Box Light Bulb
This page for the 2013 Mitsubishi Outlander helps you verify bulb sizes by lighting position, so you can match the correct replacement before you buy. Because trim level, market, and lighting package can change the fitment, it is best to confirm the bulb type for each lamp location rather than assuming every Outlander uses the same setup.
Use the bulb chart to check exterior and interior lights separately, including headlights, tail lights, turn signals, license plate lights, dome lights, and cargo-area bulbs. The 2013 Mitsubishi Outlander can use different bulb types depending on where the light is located, and this page is organized to make that lookup faster and easier.
For the best fit, compare your vehicle’s trim and equipment with the bulb list, since halogen and LED setups may differ by market and body style. Some lights may be original halogen bulbs while others may already be LED, and aftermarket LED conversions can change beam pattern, brightness, or warning behavior. Before ordering, check the bulb currently installed in the housing whenever possible, especially for items like the low beam, fog light, and daytime running light, because the exact match is the safest way to avoid returns and installation issues.
The listed low beam headlight bulb for the 2013 Mitsubishi Outlander is D2S. This is one of the most important fitment checks on the page because headlight systems can vary by trim and lighting package.
The high beam headlight bulb is 9005. If you are replacing both sides, it is usually smart to change them as a pair so the light output stays even.
The front turn signal bulb is 7440A. Make sure you match the correct socket and bulb style, since front and rear signal bulbs are not always the same on every vehicle.
The rear turn signal bulb is also listed as 7440A. Even though the front and rear signal bulbs match here, it is still worth checking the installed bulb before purchase.
The back up reverse light bulb is 7440. This bulb is commonly replaced when a reverse lamp becomes dim or stops working.
The license plate light bulb is listed as 168 or 917. Either of these bulb numbers may apply depending on the exact lamp assembly used on your Outlander.
The dome light, map light, and trunk or cargo area light all use DE3175. That makes interior replacement simpler because the same bulb type is used in multiple locations.
The glove box light bulb is 2721. This is a small interior bulb, so it helps to verify the old bulb before ordering a replacement.
The front fog light bulb is listed as H11 LED or H16 LED. The correct choice depends on the specific fog light housing and market configuration.
The daytime running light bulb is 1156. If your Outlander is equipped with daytime running lights, confirm the installed bulb and housing style before buying.
No. Trim level, market, and lighting package can vary, so some bulb sizes may differ by body style or equipment. This page is meant to help you verify the correct bulb by lighting position.
You can, but fitment and performance depend on the housing. LED replacements may change beam shape, brightness, or warning behavior, so it is important to choose bulbs that fit the socket and work properly in the original lamp assembly.
Check the bulb location, the bulb number on the old bulb, and whether the vehicle has a halogen or LED setup. For the 2013 Mitsubishi Outlander, confirming the installed bulb before purchase is the best way to avoid buying the wrong part.