
HELLA H16 Standard Halogen Bulb
$13.21
Buy on Amazon →
Used for: Fog Light Bulb Front
Used for: Fog Light Bulb Front
Used for: Headlight Bulb High Beam(with halogen headlights)
Used for: Headlight Bulb Low Beam
Used for: Back Up Reverse Light Bulb
Used for: License Plate Light Bulb, Side Marker Light Bulb Front
Used for: License Plate Light Bulb, Side Marker Light Bulb Front
Used for: Turn Signal Light Bulb Front
Used for: Turn Signal Light Bulb Rear
Used for: Dome Light Bulb, Map Light Bulb, Trunk or Cargo Area Light
Used for: Glove Box Light Bulb
This page covers the bulb sizes for the 2020 Mitsubishi Outlander and helps you verify the correct bulb by lighting position. Whether you are replacing a headlight, tail light, interior lamp, or license plate bulb, matching the bulb to the exact location is the easiest way to avoid ordering the wrong part.
The 2020 Outlander uses a mix of LED and halogen lighting depending on trim, market, and package. That means the same model year can have different bulb types for the same position, so it is important to check the chart carefully before buying replacement bulbs.
Fitment can vary by trim and lighting package, especially on vehicles with factory LED headlights or optional equipment. For example, the high beam bulb is listed as LED on Outlander models equipped with LED headlights, while halogen-equipped models use 9005 bulbs. The same kind of variation can affect fog lights and some exterior lamps. If you are converting to aftermarket LED bulbs, make sure the replacement matches the socket, physical size, and beam pattern, and always compare the installed bulb before purchasing. A quick visual check of the original bulb is the best way to confirm the exact fit.
The low beam headlight bulb listed for the 2020 Mitsubishi Outlander is H7 on the LED headlight setup shown in the chart. Always confirm your vehicle’s headlight package before ordering.
For Outlander models with halogen headlights, the high beam bulb is 9005. This applies to the halogen headlight configuration, not the LED headlight version.
On 2020 Mitsubishi Outlander models equipped with LED headlights, the high beam bulb is listed as LED. That means the bulb type differs from the halogen headlight version.
The front turn signal light bulb is 7507. If you are replacing both sides, it is a good idea to change them as a pair for even light output.
The rear turn signal light bulb for the 2020 Mitsubishi Outlander is 7440A. Check the lamp housing carefully, since rear lighting layouts can vary by market.
The back up reverse light bulb is 921. This bulb is used for the reverse lamps at the rear of the vehicle.
The license plate light bulb is 2825 or 98, depending on the exact lamp setup. Both sizes are listed for this position on the 2020 Outlander page.
Yes. The dome light bulb, map light bulb, and trunk or cargo area light bulb are all listed as DE3175 on this page.
The glove box light bulb is 2721. This is a small interior bulb, so handle the lens and socket carefully during replacement.
The front fog light bulb is listed as H16 or H8. Fog light fitment can depend on the trim and package, so confirm the installed bulb before buying.
Yes, the chart lists both the parking light bulb and the daytime running light bulb as LED. Because these are factory LED positions, replacement may involve the complete lamp assembly rather than a simple bulb swap.
Because trim, market, and body style can change the bulb type on the 2020 Mitsubishi Outlander. Checking the installed bulb helps confirm the exact socket and avoids ordering the wrong part, especially for LED-equipped models.