
PIAA 19615 9005 (HB3) Xtreme White Plus
$64.57
Buy on Amazon →
Used for: Headlight Bulb High Beam
Used for: Headlight Bulb High Beam and Low Beam
Used for: Headlight Bulb Low Beam
Used for: Back Up Reverse Light Bulb
Used for: Brake Light Bulb, Tail Light Bulb
Used for: License Plate Light Bulb, Courtesy Light Bulb, Reading Light Bulb Rear
Used for: License Plate Light Bulb, Courtesy Light Bulb, Reading Light Bulb Rear
Used for: Parking Light Bulb, Turn Signal Light Bulb Front
Used for: Side Marker Light Bulb Front, Side Marker Light Bulb Rear
Used for: Turn Signal Light Bulb Rear
Used for: Dome Light Bulb, Map Light Bulb
Used for: Glove Box Light Bulb
Used for: Glove Box Light Bulb
Used for: Interior Door Light Bulb, Trunk or Cargo Area Light
This page helps you verify bulb sizes for the 2009 Dodge Challenger by lighting position, so you can match the right replacement to the right socket. Whether you are changing a headlight, tail light, side marker, or interior lamp, checking the bulb chart first can save time and reduce the chance of buying the wrong part.
The 2009 Dodge Challenger used different bulb types depending on the lamp location, and some fitments can vary by trim, lighting package, market, and body style. Use this year page as a quick reference for common exterior and interior bulbs before you order replacements or upgrade to LED.
For best fitment results, compare the bulb listed for each position with the bulb currently installed in your car, especially if your Challenger has been modified or came with an optional lighting package. Halogen and LED bulbs are not always direct swaps, and some aftermarket LED conversions may need additional hardware, resistors, or housings to work correctly. Headlights on this model may use H13 or D1S depending on configuration, so it is important to confirm whether your car is equipped with halogen or HID-style low beams before purchasing. If you are unsure, remove the bulb and read the number on the base before ordering.
The listed high beam bulb size is 9005. Some headlight setups also use H13 for combined high and low beam configurations, so check your specific headlamp assembly before buying.
The low beam bulb size is listed as D1S for certain configurations. Because headlight equipment can vary, verify the installed bulb or headlamp type before ordering.
No. The tail light bulb is listed as 3057R, while the brake light bulb is also listed separately as 3057R on this page. Always confirm the exact lamp position before replacing bulbs.
The rear turn signal bulb is listed as 3057. This is different from the front turn signal bulb, so do not assume both ends use the same part.
Both the front turn signal light and parking light are listed as 4157NA on this page.
The back up reverse light bulb is listed as 921.
The license plate light bulb is listed as 2825 or 98. Either size may appear depending on the lamp setup.
Both the dome light and map light are listed as 578.
The glove box light bulb is listed as 194 or 7441.
The trunk or cargo area light bulb is listed as 562.
The interior door light bulb is listed as 562, and the courtesy light bulb is listed as 2825 or 98.
Yes. Both the front side marker light and rear side marker light are listed as 168NA.
Yes, many positions can be upgraded to LED, but fitment depends on the lamp location and housing. Some LED replacements may need polarity correction or additional load management to avoid warnings or hyperflash.
Because trim level, lighting package, and market differences can change the bulb used in a given position. Reading the number on the old bulb is the most reliable way to confirm fitment.