
PIAA 19618 Xtreme White Plus
Buy on Amazon →
Used for: Headlight Bulb High Beam and Low Beam(with halogen headlights)
Used for: Headlight Bulb High Beam and Low Beam(with HID headlights)
Used for: Back Up Reverse Light Bulb
Used for: Brake Light Bulb, Tail Light Bulb
Used for: License Plate Light Bulb
Used for: License Plate Light Bulb
Used for: Parking Light Bulb, Turn Signal Light Bulb Front
Used for: Side Marker Light Bulb Front, Side Marker Light Bulb Rear
Used for: Turn Signal Light Bulb Rear
Used for: Courtesy Light Bulb, Reading Light Bulb Rear
Used for: Courtesy Light Bulb, Reading Light Bulb Rear
Used for: Dome Light Bulb, Map Light Bulb
Used for: Glove Box Light Bulb
Used for: Glove Box Light Bulb
Used for: Interior Door Light Bulb, Trunk or Cargo Area Light
This 2011 Dodge Challenger bulb size guide is designed to help you verify the correct bulb by lighting position before you buy replacements. Whether you are changing a headlight, tail light, interior lamp, or a small exterior marker bulb, matching the bulb to the exact location is the best way to avoid fitment mistakes.
The 2011 Dodge Challenger used several different bulb types depending on the lighting position, and some trims or lighting packages may vary by market and body style. This page organizes the common bulb sizes for the model year so you can quickly find the right fit for the front, rear, and cabin lighting areas.
For best results, compare the bulb listed for your trim with the bulb already installed in the vehicle, especially if your Challenger has optional HID headlights or a lighting package that differs from the standard setup. Halogen and HID headlight systems use different bulbs, and aftermarket LED conversions may change the bulb type or require extra adapters, resistors, or housings. If you are unsure, remove the existing bulb and check the base and markings before ordering, since trim and package differences can affect fitment.
The halogen headlight setup uses H13 bulbs for both high beam and low beam functions.
The HID headlight setup uses D1S bulbs. This applies only to models equipped with HID headlights.
The front turn signal bulb is 4157NA.
The front parking light bulb is 4157NA.
The rear turn signal bulb is 3057.
Both the brake light and tail light use 3057R bulbs.
The back up reverse light bulb is 921.
The license plate light uses 168 or 917 bulbs.
Both the dome light and map light use 578 bulbs.
The glove box light bulb is 194 or 7441.
The rear reading light and courtesy light use 2825 or 98 bulbs.
Both the trunk or cargo area light and the interior door light use 562 bulbs.
The front side marker light and rear side marker light both use 168NA bulbs.
Not always. Trim level, lighting package, and market can change the bulb type, especially for headlights and some interior or exterior lamps.
Yes. Checking the bulb already installed is the safest way to confirm fitment, especially if the car has been modified or converted to LED.