
PIAA 19618 Xtreme White Plus
Buy on Amazon →
Used for: Headlight Bulb High Beam and Low Beam(with halogen headlights)
Used for: Headlight Bulb High Beam and Low Beam(with HID headlights)
Used for: Back Up Reverse Light Bulb
Used for: Brake Light Bulb, Tail Light Bulb
Used for: License Plate Light Bulb
Used for: License Plate Light Bulb
Used for: Parking Light Bulb, Turn Signal Light Bulb Front
Used for: Side Marker Light Bulb Front, Side Marker Light Bulb Rear
Used for: Turn Signal Light Bulb Rear
Used for: Courtesy Light Bulb, Reading Light Bulb Rear
Used for: Courtesy Light Bulb, Reading Light Bulb Rear
Used for: Dome Light Bulb, Map Light Bulb
Used for: Glove Box Light Bulb
Used for: Glove Box Light Bulb
Used for: Interior Door Light Bulb, Trunk or Cargo Area Light
This 2014 Dodge Challenger bulb size guide is designed to help you verify the correct bulb for each lighting position on your car. Instead of guessing by shape or wattage, you can match the bulb type to the exact location, such as headlights, tail lights, reverse lights, and interior lamps.
The 2014 Challenger used different bulb setups depending on trim, lighting package, and market, so the same model year may not use the same bulb in every case. Use this page to compare bulb sizes by lighting position before you buy replacements and to reduce the chance of ordering the wrong part.
For the best fitment results, always confirm whether your 2014 Dodge Challenger has halogen headlights or HID headlights, since the headlight bulb type changes between those setups. Trim and package differences can also affect exterior and interior lamps, and aftermarket LED conversions may require additional parts or may not fit exactly like the original bulb. If you are replacing a bulb that has already failed, it is a good idea to remove the installed bulb and compare it before purchasing, especially for small interior, marker, and license plate lights.
A 2014 Dodge Challenger with halogen headlights uses H13 bulbs for both high beam and low beam functions.
A 2014 Dodge Challenger with HID headlights uses D1S bulbs for both high beam and low beam functions.
The back up reverse light bulb is 921.
The license plate lights use 168 or 917 bulbs.
The glove box light uses 194 or 7441 bulbs.
Both the front side marker light and rear side marker light use 168NA bulbs.
The rear reading light and courtesy light use 2825 or 98 bulbs.
The front turn signal light and parking light both use 4157NA bulbs.
Both the dome light and map light use 578 bulbs.
The brake light and tail light use 3057R bulbs.
The rear turn signal light uses a 3057 bulb.
Both the trunk or cargo area light and the interior door light use 567 bulbs.
The center high mount stop light is listed as LED, so there is no separate bulb size provided here.
Checking the installed bulb helps confirm the exact fit, especially if your Challenger has had prior repairs, aftermarket lighting, or a trim-specific package that changes the bulb type.