
Marsauto M1C H11 LED Fog Light Bulbs, 30000LM 6000K Cool ...
$17.99
Buy on Amazon →
Used for: Fog Light Bulb Front
Used for: Fog Light Bulb Front
Used for: Headlight Bulb High Beam and Low Beam(with halogen headlights)
Used for: Headlight Bulb High Beam and Low Beam(with HID headlights)
Used for: Dome Light Bulb, Map Light Bulb
Used for: Glove Box Light Bulb
Used for: Glove Box Light Bulb
Used for: Interior Door Light Bulb, Trunk or Cargo Area Light
Used for: Reading Light Bulb Rear
Used for: Reading Light Bulb Rear
This page helps you verify the bulb sizes for the 2018 Dodge Challenger by lighting position, so you can match the correct replacement before you buy. Because trim and lighting equipment can vary, it is important to confirm whether your car uses halogen or HID headlights and to check the specific lamp location on the vehicle.
For the 2018 Dodge Challenger, many exterior and interior lights use LED assemblies, while some interior positions still use replaceable bulbs. Use this guide to compare the bulb chart with your Challenger’s actual setup, including headlights, fog lights, tail lamps, reverse lights, license plate lights, and cabin bulbs.
Fitment can vary by trim, package, market, and body style, so the same 2018 Dodge Challenger may not use the same bulb in every position. Headlight fitment is especially important because halogen and HID-equipped cars use different bulb types, and some LED exterior lights may be part of a sealed assembly rather than a simple replaceable bulb. If you are converting to aftermarket LED bulbs, make sure the bulb shape, base, and space behind the housing are compatible, and check for proper beam pattern and error-free operation. Before ordering, it is always smart to inspect the bulb currently installed in your car and compare it with the chart for your exact trim and lighting package.
Models with halogen headlights use 9012 bulbs for both the high beam and low beam positions.
Models with HID headlights use D3S bulbs for the high beam and low beam positions.
No. The front fog light listing shows H11 LED or H16 LED, so the exact fit can depend on the vehicle’s equipment and lighting package.
Both the dome light and map light use 578 bulbs on this page.
The glove box light is listed as 194 or 7441.
The rear reading light uses 2825 or 98 bulbs.
The trunk or cargo area light uses a 567 bulb.
The interior door light uses a 567 bulb as well.
The chart lists the brake light bulb and tail light bulb as LED, which usually means the light source is part of an LED assembly rather than a standard replaceable bulb.
Check the exact lighting position, verify whether your car has halogen or HID headlights, and compare the installed bulb or assembly with the chart before ordering.
Yes. Trim and lighting package can vary by market and body style, so bulb fitment may differ between vehicles even within the same model year.
Yes, in some positions, but you should confirm physical fit, electrical compatibility, and beam pattern. Some locations are already LED assemblies, while others may accept replacement bulbs or require a specific conversion approach.