
PIAA 19618 Xtreme White Plus
Buy on Amazon →
Used for: Headlight Bulb High Beam and Low Beam(with halogen headlights)
Used for: Headlight Bulb High Beam and Low Beam(with HID headlights)
Used for: Back Up Reverse Light Bulb
Used for: Brake Light Bulb, Tail Light Bulb
Used for: License Plate Light Bulb
Used for: License Plate Light Bulb
Used for: Parking Light Bulb, Turn Signal Light Bulb Front
Used for: Side Marker Light Bulb Front, Side Marker Light Bulb Rear
Used for: Turn Signal Light Bulb Rear
Used for: Courtesy Light Bulb, Reading Light Bulb Rear
Used for: Courtesy Light Bulb, Reading Light Bulb Rear
Used for: Dome Light Bulb, Map Light Bulb
Used for: Glove Box Light Bulb
Used for: Glove Box Light Bulb
Used for: Interior Door Light Bulb, Trunk or Cargo Area Light
This 2012 Dodge Challenger bulb size guide helps you verify the correct bulbs by lighting position, so you can replace the right part the first time. Whether you are changing a headlight, tail light, reverse light, or a small interior bulb, matching the bulb to the exact location is the easiest way to avoid fitment mistakes.
The 2012 Dodge Challenger uses different bulb types depending on the lighting position and the equipment on the car. This page organizes the common exterior and interior bulb sizes for the 2012 Challenger so you can quickly compare your vehicle’s setup before ordering replacement bulbs.
Fitment can vary by trim, lighting package, market, and body style, so it is smart to confirm what is installed on your specific car before buying. Some 2012 Challenger models use halogen headlights with H13 bulbs, while others with HID headlights use D1S bulbs, and aftermarket conversions may change the required bulb or connector. LED replacement bulbs can also differ in size, brightness, and polarity, so check the bulb base and the original lamp housing before purchase. If you are unsure, remove the old bulb and compare it directly to the listing to make sure the replacement matches.
The 2012 Dodge Challenger with halogen headlights uses H13 bulbs for both the high beam and low beam function.
2012 Dodge Challenger models with HID headlights use D1S bulbs.
The back up reverse light bulb is 921.
The license plate light bulb sizes listed for the 2012 Dodge Challenger are 168 and 917.
Both the front side marker light and rear side marker light use 168NA bulbs.
The front turn signal light and parking light both use 4157NA bulbs.
The rear turn signal light bulb is 3057.
The brake light bulb and tail light bulb are both 3057R.
The center high mount stop light uses an LED assembly or LED bulb setup, depending on the vehicle configuration.
The dome light bulb and map light bulb are both 578.
The rear reading light bulb and courtesy light bulb are both 2825 or 98.
The glove box light bulb is 194 or 7441.
Both the trunk or cargo area light and the interior door light use 567 bulbs.
Because trim and lighting package differences can change the bulb type, checking the installed bulb helps confirm the exact fit and avoids ordering the wrong part.