
Marsauto M1C H11 LED Fog Light Bulbs, 30000LM 6000K Cool ...
$17.99
Buy on Amazon →
Used for: Fog Light Bulb Front
Used for: Headlight Bulb High Beam and Low Beam(with halogen headlights)
Used for: Headlight Bulb High Beam and Low Beam(with HID headlights)
Used for: Dome Light Bulb, Map Light Bulb
Used for: Glove Box Light Bulb
Used for: Glove Box Light Bulb
Used for: Interior Door Light Bulb, Trunk or Cargo Area Light
Used for: Reading Light Bulb Rear
Used for: Reading Light Bulb Rear
If you are looking for bulb sizes for a 2020 Dodge Challenger, this page is designed to help you match the right bulb to each lighting position. The Challenger can use different bulb types depending on the lamp location, and this year page organizes the fitment by front, rear, and interior areas so you can verify what belongs where before buying replacements.
Use this 2020 Dodge Challenger bulb guide to check common exterior and interior lighting points such as headlights, fog lights, turn signals, brake lights, license plate lights, dome lights, map lights, and cargo-area bulbs. Because trim and lighting equipment can vary, confirming the bulb by position is the safest way to avoid ordering the wrong part.
Fitment can change based on trim level, lighting package, body style, and market, so always compare the bulb listing on this page with the bulb already installed in your Challenger. This is especially important when choosing between halogen and HID headlight setups, since the 2020 Challenger uses different headlight bulb types depending on the equipment installed. LED conversions and aftermarket upgrades can also affect compatibility, beam pattern, and warning messages, so check whether the replacement is a direct-fit bulb or requires additional hardware. If possible, remove one bulb first and verify the base type, connector, and size before purchasing a full set.
The 2020 Dodge Challenger can use D3S bulbs for high beam and low beam with HID headlights, or 9012 bulbs for high beam and low beam with halogen headlights. The correct type depends on the headlight system installed on the car.
Yes, the bulb chart for this year shows LED lighting for several rear exterior positions, including the brake light, tail light, turn signal light rear, center high mount stop light, back up reverse light, license plate light, and rear side marker light.
The front fog light bulb listed for the 2020 Dodge Challenger is H11 LED.
No. The 2020 Dodge Challenger uses LED bulbs for both positions, but the front turn signal light bulb and rear turn signal light bulb are listed separately, so it is best to verify the exact location before ordering.
The dome light bulb listed for the 2020 Dodge Challenger is 578.
The map light bulb is listed as 578, and the rear reading light bulb is listed as 2825 or 98.
The glove box light bulb is listed as 194 or 7441.
The trunk or cargo area light bulb is listed as 567.
Yes. The front side marker light bulb and rear side marker light bulb are both listed on this page, and they are separate fitment points even though both use LED lighting.
Because trim and lighting package differences can change the bulb type, checking the installed bulb helps confirm the correct fitment. This is especially useful on a 2020 Dodge Challenger when the car may have different lighting equipment depending on market or package.
Aftermarket LED conversions may be possible, but they are not always plug-and-play and may affect beam pattern or compatibility. For the 2020 Dodge Challenger, it is important to confirm the original headlight setup first and choose parts that are designed for that housing.
No, they are separate lighting positions. Even when both are listed as LED on the 2020 Dodge Challenger, each lamp should be matched to its specific location.
Use the bulb chart by lighting position and compare it with the bulb currently installed in your vehicle. Trim and package differences can affect the exact bulb used, so the installed bulb is the best final check before purchase.