
PIAA 15223 H3 Xtreme White Plus
$67.15
Buy on Amazon →
Used for: Fog Light Bulb Front
Used for: Fog Light Bulb Front
Used for: Headlight Bulb High Beam
Used for: Headlight Bulb High Beam and Low Beam
Used for: Headlight Bulb Low Beam(Evolution, with halogen headlights)
Used for: Headlight Bulb Low Beam(Evolution, with HID headlights)
Used for: Back Up Light Bulb(Sportback Ralliart), Center High Mount Stop Light Bulb(ES), Turn Signal Light Bulb Front Inner
Used for: Back Up Reverse Light Bulb, Center High Mount Stop Light Bulb
Used for: Brake Light Bulb, Tail Light Bulb(ES)
Used for: License Plate Light Bulb, Parking Light Bulb, Side Marker Light Bulb Front, Side Marker Light Bulb Rear, Tail Light Bulb(Evolution, Compare to original - Option 1)
Used for: License Plate Light Bulb, Parking Light Bulb, Side Marker Light Bulb Front, Side Marker Light Bulb Rear, Tail Light Bulb(Evolution, Compare to original - Option 1)
Used for: Turn Signal Light Bulb Front, Turn Signal Light Bulb Rear
Used for: Turn Signal Light Bulb Front Outer
Used for: Dome Light Bulb
Used for: Trunk or Cargo Area Light
This 2004 Mitsubishi Lancer bulb size page is designed to help you verify the correct bulb by lighting position, so you can match the right part to the right socket before you buy. Because the 2004 Lancer was offered with different trims, body styles, and lighting packages, the correct bulb can vary depending on where it is used on the car.
Use this guide as a quick reference for headlights, tail lights, turn signals, interior lights, and other exterior lamps on the 2004 Mitsubishi Lancer. If you are replacing a burned-out bulb, checking the position first is the easiest way to avoid ordering the wrong size or style.
Fitment can change by trim, market, and package, so it is smart to compare the bulb in your vehicle with the listing before ordering. Halogen and HID setups use different headlight bulbs, and some aftermarket LED conversions may require extra adapters, resistors, or housings to work correctly. The safest approach is to inspect the installed bulb, confirm the base and connector style, and then buy the replacement that matches your exact setup.
The listed high beam bulb size is 9005. Always confirm the lamp position before ordering, since some lighting setups can differ by trim or market.
Low beam fitment depends on the version. The Evolution with halogen headlights uses H11, while the Evolution with HID headlights uses D2S. Some models also use a 9007 headlight bulb for high beam and low beam together.
The front turn signal bulb is listed as 7440A. On some versions, the front inner turn signal uses 7440 and the front outer turn signal uses 2827.
The rear turn signal bulb size is 7440A for the standard listing on this page.
The brake light bulb is 7443R. This is a specific dual-filament style used for brake lamp applications on certain trims.
The ES tail light bulb is listed as 7443R. Other versions, including Evolution-related listings, may use different bulb sizes.
The center high mount stop light uses 921 on the standard listing. The ES version is listed separately with 7440.
The back up reverse light bulb is 921. Some Sportback Ralliart applications are listed separately with 7440 for the back up light.
The dome light bulb size is DE3175. This is an interior bulb, so make sure the replacement matches the original length and connector style.
The license plate light bulb is listed as 2825 or 98. Both are shown on this page for that position.
The parking light bulb, front side marker bulb, and rear side marker bulb are listed as 2825 or 98. These positions use the same bulb size on the page.
The front fog light bulb listing is H3C or H3, depending on the exact setup. Check the housing and connector before buying.
Yes, but fitment is not always plug-and-play. Some LED bulbs may need polarity checks, load resistors, or compatible housings to avoid flickering, warning lights, or poor beam pattern.
Trim and lighting package differences can change bulb fitment. Market-specific versions, Evolution models, and aftermarket headlight or tail light assemblies may use different bulbs than the base car.
Yes. Checking the installed bulb is the best way to confirm the correct size, especially if the car has been modified or fitted with replacement lamps.