
PIAA 19615 9005 (HB3) Xtreme White Plus
$64.57
Buy on Amazon →
Used for: Headlight Bulb High Beam
Used for: Headlight Bulb High Beam and Low Beam
Used for: Back Up Reverse Light Bulb, Turn Signal Light Bulb Rear
Used for: Brake Light Bulb, Tail Light Bulb Outer
Used for: License Plate Light Bulb, Parking Light Bulb(with halogen headlights), Side Marker Light Bulb Front(with halogen headlights), Side Marker Light Bulb Rear, Tail Light Bulb Inner
Used for: License Plate Light Bulb, Parking Light Bulb(with halogen headlights), Side Marker Light Bulb Front(with halogen headlights), Side Marker Light Bulb Rear, Tail Light Bulb Inner
Used for: Side Marker Light Bulb Front(with HID headlights)
Used for: Turn Signal Light Bulb Front
Used for: Dome Light Bulb, Map Light Bulb
Used for: Trunk or Cargo Area Light
Looking for 2017 Mitsubishi Lancer bulb sizes? This page organizes the most common exterior and interior lighting positions so you can verify the correct bulb by location before you buy. It is a practical reference for headlights, tail lights, turn signals, parking lights, and cabin bulbs on the 2017 Lancer.
Because trim and lighting equipment can vary, the same model year may use different bulbs depending on the headlight package and market. Use the bulb chart on this page to match the bulb size to the exact lighting position on your car, whether you are replacing a burned-out lamp or planning a full refresh.
For the best fit, always confirm your trim level and headlight type before ordering. A halogen-equipped 2017 Mitsubishi Lancer can use different parking and side marker bulbs than a version with HID headlights, and some cars may also have LED lighting in certain positions. If you are converting from halogen to aftermarket LED bulbs, check the physical length, connector style, and beam pattern so the new bulb fits the housing correctly and performs well. When in doubt, compare the installed bulb to the listing before purchase, since small production or market differences can affect fitment.
The high beam headlight bulb is 9005 on the 2017 Mitsubishi Lancer.
HID-equipped versions use a D2S bulb for the headlight high beam and low beam listing shown on this page.
The front turn signal light bulb is 7440A.
The rear turn signal light bulb is 7440.
The brake light bulb is 7443R, and the outer tail light bulb is also 7443R.
The inner tail light bulb is 2825, 98.
No. The bulb can vary by headlight type. Halogen headlight models use 2825, 98 for the parking light and front side marker, while HID headlight models use 2827 for the front side marker and LED for the parking light.
The license plate light bulb is 2825, 98.
The dome light bulb is DE3175.
The map light bulb is DE3175.
The trunk or cargo area light uses a DE3022 bulb.
Yes, some positions are listed as LED, including the center high mount stop light, daytime running light, and the parking light on HID headlight models.
Because trim, lighting package, and market differences can change the bulb used in a given position. Checking the installed bulb helps confirm the correct fit and avoids ordering the wrong size.
Yes, many owners do, but the replacement must fit the housing and connector correctly. It is important to confirm bulb size, depth, and beam pattern so the light works properly and does not cause glare or fitment issues.