
PIAA 19615 9005 (HB3) Xtreme White Plus
$64.57
Buy on Amazon →
Used for: Headlight Bulb High Beam
Used for: Headlight Bulb High Beam and Low Beam
Used for: Back Up Reverse Light Bulb, Turn Signal Light Bulb Rear
Used for: Brake Light Bulb, Tail Light Bulb Outer
Used for: License Plate Light Bulb, Parking Light Bulb(with halogen headlights), Side Marker Light Bulb Front(with halogen headlights), Side Marker Light Bulb Rear, Tail Light Bulb Inner
Used for: License Plate Light Bulb, Parking Light Bulb(with halogen headlights), Side Marker Light Bulb Front(with halogen headlights), Side Marker Light Bulb Rear, Tail Light Bulb Inner
Used for: Side Marker Light Bulb Front(with HID headlights)
Used for: Turn Signal Light Bulb Front
Used for: Dome Light Bulb, Map Light Bulb
Used for: Trunk or Cargo Area Light
This 2016 Mitsubishi Lancer bulb size guide helps you verify the correct bulbs by lighting position, so you can match the right part before ordering. Because trim level, lighting package, and market can change the fitment, it is important to confirm the exact bulb type for the headlamps, exterior signals, and interior lights on your specific car.
For the 2016 Mitsubishi Lancer, the bulb chart includes common locations such as the high beam, turn signal, brake light, reverse light, license plate light, dome light, map light, and trunk/cargo lamp. Some positions use halogen-style bulbs, while others use LED or HID-related parts, so this page is meant to help you narrow down the correct bulb by function and location.
Fitment can vary between trims and package combinations, especially when comparing halogen headlights to HID-equipped models or factory LED lighting. If your Lancer has been modified with aftermarket conversions, the bulb listed for the original equipment may not match what is currently installed. Before buying replacement bulbs, check the bulb already in the housing, compare the connector and base style, and confirm whether your car uses a standard halogen setup, an HID system, or an LED assembly. That quick check can prevent ordering the wrong part and save time during installation.
The listed high beam bulb size is 9005 for the 2016 Mitsubishi Lancer.
The front turn signal bulb is listed as 7440A.
The brake light bulb is listed as 7443R.
The outer tail light bulb is listed as 7443R.
The rear turn signal bulb is listed as 7440.
The back up reverse light bulb is listed as 7440.
The license plate light bulb is listed as 2825 or 98.
Both the dome light and map light are listed as DE3175.
The trunk or cargo area light is listed as DE3022.
Yes. The chart shows different fitments depending on headlight type. Halogen-equipped models use 2825 or 98 for the parking light and front side marker, while HID-equipped models use 2827 for the front side marker and LED for the parking light.
For HID-equipped models, the headlight bulb listed for high beam and low beam is D2S, and the parking light is LED.
Yes. The daytime running light bulb is listed as LED.
Because trim and lighting package differences can change the fitment, and aftermarket changes may mean the original bulb listing no longer matches the bulb currently in the vehicle.
Sometimes aftermarket LED replacements are available, but fitment depends on the housing, connector, and local regulations. It is best to compare the installed bulb and confirm compatibility before purchasing.