
Marsauto M1C H11 LED Fog Light Bulbs, 30000LM 6000K Cool ...
$17.99
Buy on Amazon →
Used for: Fog Light Bulb Front
Used for: Fog Light Bulb Front
Used for: Headlight Bulb High Beam
Used for: Headlight Bulb High Beam and Low Beam
Used for: Back Up Reverse Light Bulb, Turn Signal Light Bulb Rear
Used for: Brake Light Bulb, Tail Light Bulb Outer
Used for: Daytime Running Light Bulb
Used for: License Plate Light Bulb, Side Marker Light Bulb Rear, Tail Light Bulb Inner
Used for: License Plate Light Bulb, Side Marker Light Bulb Rear, Tail Light Bulb Inner
Used for: Parking Light Bulb, Side Marker Light Bulb Front
Used for: Turn Signal Light Bulb Front
Used for: Dome Light Bulb, Map Light Bulb
Used for: Trunk or Cargo Area Light
This page helps you verify the bulb sizes for the 2011 Mitsubishi Lancer by lighting position, so you can match the correct bulb to the right socket before you buy. Because trim level, market, and lighting package can change the setup, it is best to compare the bulb chart with the lights on your own car.
For the 2011 Mitsubishi Lancer, the chart below covers common exterior and interior bulbs such as headlights, fog lights, turn signals, brake lights, license plate lights, dome lights, and map lights. Use it as a practical reference when replacing a single bulb or planning a full lighting refresh.
Fitment can vary on the 2011 Lancer depending on body style, trim, and whether the car came with halogen or HID-style headlights. Some positions also have LED or aftermarket conversion options, especially for fog lights and interior lamps, so the listed size may not be the only possible setup. Before ordering, check the bulb currently installed in your vehicle, confirm the connector and base style, and make sure any replacement matches your existing housing and local lighting requirements.
The listed high beam bulb size is 9005 on many versions of the 2011 Mitsubishi Lancer. Some trims or lighting packages may use a different headlight setup, so confirm what is installed before purchasing.
Some versions use a D2S headlight bulb for both high beam and low beam in the same housing. Other versions use separate bulbs, so the correct fit depends on the trim and lighting package.
The front turn signal light bulb is listed as 7440A.
The rear turn signal light bulb is listed as 7440.
The brake light bulb is listed as 7443R, and the outer tail light bulb also uses 7443R on the 2011 Mitsubishi Lancer.
The inner tail light bulb is listed as 2825, 98.
The license plate light bulb is listed as 2825, 98.
Both the dome light and map lights are listed as DE3175.
The trunk or cargo area light uses a DE3022 bulb.
Both the front parking light and front side marker light are listed as 2827.
The rear side marker light bulb is listed as 2825, 98.
The back up reverse light bulb is listed as 7440, and the daytime running light bulb is listed as 1156 on applicable versions.
The front fog light bulb is listed as H11 LED or H16 LED, depending on the setup.
Yes, some positions can be converted to LED, but fitment depends on the housing, connector, and local regulations. Always confirm the exact bulb base and check for proper beam pattern and warning issues before changing from halogen to LED.