
PIAA 15223 H3 Xtreme White Plus
$67.15
Buy on Amazon →
Used for: Fog Light Bulb Front
Used for: Fog Light Bulb Front
Used for: Headlight Bulb High Beam
Used for: Headlight Bulb High Beam and Low Beam
Used for: Headlight Bulb Low Beam(Evolution MR, with halogen headlights)
Used for: Headlight Bulb Low Beam(Evolution MR, with HID headlights)
Used for: Back Up Reverse Light Bulb, Center High Mount Stop Light Bulb
Used for: Brake Light Bulb, Tail Light Bulb
Used for: Center High Mount Stop Light Bulb(ES), Turn Signal Light Bulb Front Inner(ES)
Used for: License Plate Light Bulb, Parking Light Bulb, Side Marker Light Bulb Front, Side Marker Light Bulb Rear
Used for: License Plate Light Bulb, Parking Light Bulb, Side Marker Light Bulb Front, Side Marker Light Bulb Rear
Used for: Turn Signal Light Bulb Front Inner, Turn Signal Light Bulb Rear
Used for: Turn Signal Light Bulb Front Outer
Used for: Dome Light Bulb
Used for: Trunk or Cargo Area Light
This 2005 Mitsubishi Lancer bulb guide helps you verify the correct bulb sizes by lighting position, so you can replace the right part the first time. Whether you are changing a headlight, tail light, interior lamp, or a small exterior marker, matching the bulb to the exact location is the easiest way to avoid fitment mistakes.
Because trim and lighting equipment can vary by market and body style, the same 2005 Lancer may use different bulbs in different positions. Use the chart on this page as a position-by-position reference for common replacement bulbs on the 2005 Mitsubishi Lancer, including standard models and special versions such as Evolution MR where listed.
For the best fit, always compare the bulb type on this page with the bulb already installed in your car before buying. Trim package, region, and factory lighting options can change the correct bulb, especially for headlights and fog lights. This is also important if your Lancer has halogen bulbs, HID headlights, or an aftermarket LED conversion, since the bulb base may be the same but the light output, beam pattern, or housing compatibility may differ. If you are upgrading to LED, make sure the bulb is designed for your housing and check for clearance, polarity, and possible warning issues before installation.
It depends on the trim and lighting setup. Common listings for the 2005 Lancer include 9005 for high beam, 9007 for combined high and low beam setups, 9006 for Evolution MR halogen low beam, and D2S for Evolution MR HID low beam headlights.
No. The front inner turn signal bulb is listed as 7440A on many versions, while the front outer turn signal bulb is listed as 2827. Some ES applications may use 7440 for the front inner turn signal.
The rear brake light bulb and tail light bulb are both listed as 7443R on this page.
The back up reverse light bulb is listed as 921.
The center high mount stop light bulb is listed as 921 on most versions, with an ES-specific listing of 7440 for certain applications.
The license plate light bulb is listed as 2825 or 98.
The parking light bulb, front side marker bulb, and rear side marker bulb are all listed as 2825 or 98.
The dome light bulb is listed as DE3175.
The trunk or cargo area light uses a DE3022 bulb.
The front fog light bulb is listed as H3C or H3, depending on the setup.
Because trim level, market, and factory lighting package can change the bulb type. That is why this page lists multiple valid bulbs for certain positions instead of one universal part number.
Yes. Checking the installed bulb is the safest way to confirm fitment, especially if your Lancer has been modified, has aftermarket headlights, or came with a different regional lighting package.
You can in some positions, but fitment and beam pattern matter. Make sure the LED matches the bulb base, fits the housing, and is suitable for your headlight or signal application before purchasing.
Not always. The Evolution MR has separate listings for HID and halogen headlight setups, so it is important to use the bulb size that matches the exact lighting system on the car.