
PIAA 15223 H3 Xtreme White Plus
$67.15
Buy on Amazon →
Used for: Fog Light Bulb Front
Used for: Fog Light Bulb Front
Used for: Headlight Bulb High Beam
Used for: Headlight Bulb High Beam and Low Beam
Used for: Headlight Bulb Low Beam(Evolution MR, with halogen headlights)
Used for: Headlight Bulb Low Beam(Evolution MR, with HID headlights)
Used for: Back Up Reverse Light Bulb, Center High Mount Stop Light Bulb
Used for: Brake Light Bulb, Tail Light Bulb
Used for: Center High Mount Stop Light Bulb(ES), Turn Signal Light Bulb Front Inner(ES)
Used for: License Plate Light Bulb, Parking Light Bulb, Side Marker Light Bulb Front, Side Marker Light Bulb Rear
Used for: License Plate Light Bulb, Parking Light Bulb, Side Marker Light Bulb Front, Side Marker Light Bulb Rear
Used for: Turn Signal Light Bulb Front Inner, Turn Signal Light Bulb Rear
Used for: Turn Signal Light Bulb Front Outer
Used for: Dome Light Bulb
Used for: Trunk or Cargo Area Light
This 2006 Mitsubishi Lancer bulb size guide helps you verify the correct bulbs by lighting position, so you can match the right part before you buy. Whether you are replacing a headlight, tail light, dome light, or license plate lamp, checking the bulb location first is the easiest way to avoid fitment mistakes.
Bulb sizes can vary on the 2006 Lancer depending on trim, body style, and lighting package. This page organizes the common exterior and interior bulb positions for the model year, including standard halogen setups and special Evolution MR headlight configurations, so you can compare the bulb type to the exact lamp you are servicing.
For best results, confirm the installed bulb before ordering, especially if your Lancer has different trim equipment, an optional package, or an aftermarket lighting conversion. Halogen and LED replacements are not always direct swaps, and some LED upgrades may need additional parts or may not fit the housing correctly. If your car has been modified, or if the headlights were changed by a previous owner, the bulb listed for the original vehicle may not match what is currently installed. Always check the old bulb, the connector, and the housing style before purchase.
Most 2006 Mitsubishi Lancer models use 9007 for the combined high beam and low beam headlight setup. Evolution MR models are different and may use D2S with HID headlights or 9006 with halogen headlights, depending on the factory configuration.
The standard high beam bulb listed for this year is 9005. On some versions, the headlight system is a combined high beam and low beam design that uses 9007 instead.
The front fog light bulb is listed as H3C or H3. Because fog light housings can vary by market and trim, it is a good idea to compare the installed bulb before ordering.
The brake light bulb is 7443R. This bulb is also listed for the tail light bulb position on the 2006 Mitsubishi Lancer.
The rear turn signal light bulb is 7440A on the standard listing. Some ES-specific lighting configurations may use 7440 for the front inner turn signal and center high mount stop light positions.
The back up reverse light bulb is 921. This is a common fitment for the 2006 Mitsubishi Lancer and is also used in the center high mount stop light listing on some versions.
The dome light bulb is DE3175. This is the interior roof lamp bulb used for the cabin light on the 2006 Mitsubishi Lancer.
The license plate light bulb is listed as 2825 or 98. The same bulb sizes are also used for the parking light and front and rear side marker light positions on this model.
Yes, the front parking light, front side marker light, and rear side marker light are all listed as 2825 or 98 on the 2006 Mitsubishi Lancer.
The trunk or cargo area light uses a DE3022 bulb. This is the interior cargo lamp bulb listed for the 2006 Mitsubishi Lancer.
Yes. The ES trim can have different lighting details, including a 7440 front inner turn signal bulb and a 7440 center high mount stop light bulb. That is why it is important to match the bulb to the exact trim and lamp position.
In many positions, yes, but fitment can vary. LED replacements may require polarity checks, different bulb shapes, or extra load resistors to prevent warning issues or fast flashing. Always confirm the socket type and housing clearance before buying LED bulbs.
Because trim and lighting packages can differ by market, body style, and previous repairs or modifications. Checking the installed bulb helps confirm the exact size, especially for headlights, fog lights, and any vehicle that has been converted from halogen to HID or LED.