
Marsauto M1C H11 LED Fog Light Bulbs, 30000LM 6000K Cool ...
$17.99
Buy on Amazon →
Used for: Fog Light Bulb Front
Used for: Fog Light Bulb Front
Used for: Headlight Bulb High Beam
Used for: Headlight Bulb High Beam and Low Beam
Used for: Back Up Reverse Light Bulb, Turn Signal Light Bulb Rear
Used for: Brake Light Bulb, Tail Light Bulb Outer
Used for: Daytime Running Light Bulb
Used for: License Plate Light Bulb, Side Marker Light Bulb Rear, Tail Light Bulb Inner
Used for: License Plate Light Bulb, Side Marker Light Bulb Rear, Tail Light Bulb Inner
Used for: Parking Light Bulb, Side Marker Light Bulb Front
Used for: Turn Signal Light Bulb Front
Used for: Dome Light Bulb, Map Light Bulb
Used for: Trunk or Cargo Area Light
If you need to replace a bulb on your 2010 Mitsubishi Lancer, this page is designed to help you verify the correct bulb size by lighting position. The Lancer could use different bulb types depending on trim, body style, market, and lighting package, so checking the exact lamp location is the safest way to match the right replacement.
Use the chart to compare common exterior and interior bulbs such as headlights, tail lights, turn signals, reverse lights, fog lights, license plate lights, dome lights, and map lights. Matching the bulb to the correct position helps avoid ordering the wrong part and makes replacement faster and easier.
Fitment can vary on the 2010 Mitsubishi Lancer, especially between halogen and HID setups, and between standard and upgraded lighting packages. Some positions may also accept LED replacements or aftermarket conversion bulbs, but the bulb base and physical size still need to match the original housing. Before buying, it is smart to inspect the installed bulb or check the owner’s manual and compare it with the listing for your exact trim. This is especially important for headlights and fog lights, where the factory setup may differ from one Lancer to another.
The listed high beam bulb is 9005 on many 2010 Mitsubishi Lancer models. Some versions may use a different headlight setup, so confirm the lamp type on your specific trim before ordering.
Some 2010 Mitsubishi Lancer models with HID lighting use D2S for the headlight bulb high beam and low beam setup. This is not the same as the halogen 9005 setup, so the factory lighting package matters.
The front turn signal bulb is listed as 7440A.
The rear turn signal bulb is listed as 7440.
The brake light bulb is listed as 7443R, and the outer tail light bulb is also listed as 7443R.
The inner tail light bulb is listed as 2825, 98.
The back up reverse light bulb is listed as 7440.
The front fog light bulb is listed as H11 LED or H16 LED depending on the setup. Check the housing and the bulb currently installed before purchasing.
Both the dome light and map light are listed as DE3175.
The license plate light bulb is listed as 2825, 98.
The front parking light bulb is listed as 2827, and the front side marker light bulb is also listed as 2827.
Yes. The rear side marker light bulb is listed as 2825, 98, which is different from the front side marker bulb.
The trunk or cargo area light is listed as DE3022.
Yes, the daytime running light bulb is listed as 1156 on applicable models.
Because trim and lighting package differences can change the correct bulb type. Checking the installed bulb helps confirm the exact fit before you order, especially if your Lancer has been modified or uses an optional lighting package.