
Marsauto M1C H11 LED Fog Light Bulbs, 30000LM 6000K Cool ...
$17.99
Buy on Amazon →
Used for: Fog Light Bulb Front
Used for: Fog Light Bulb Front
Used for: Fog Light Bulb Front
Used for: Headlight Bulb High Beam
Used for: Headlight Bulb High Beam and Low Beam
Used for: Back Up Reverse Light Bulb, Turn Signal Light Bulb Rear
Used for: Brake Light Bulb, Tail Light Bulb Outer
Used for: Daytime Running Light Bulb
Used for: License Plate Light Bulb, Side Marker Light Bulb Rear, Tail Light Bulb Inner
Used for: License Plate Light Bulb, Side Marker Light Bulb Rear, Tail Light Bulb Inner
Used for: Parking Light Bulb, Side Marker Light Bulb Front
Used for: Turn Signal Light Bulb Front
Used for: Dome Light Bulb, Map Light Bulb
Used for: Trunk or Cargo Area Light
If you need bulb size information for a 2012 Mitsubishi Lancer, this page is organized to help you verify the correct bulb by lighting position. That makes it easier to match the right part for the headlight, tail light, interior, and exterior lamps without guessing from a generic fitment list.
The 2012 Mitsubishi Lancer uses different bulb types depending on the lamp location, and some positions may vary by trim, market, or lighting package. Use the bulb chart for a quick reference before ordering replacement bulbs, especially if you are replacing more than one light at the same time.
For best fitment, always compare the bulb listed for your exact trim and the bulb already installed in the vehicle before buying. This is especially important on the 2012 Mitsubishi Lancer because halogen and HID setups can differ, and some fog light or headlight configurations may use different bulb types or LED replacements. If you are considering aftermarket LED conversions, check the housing design, beam pattern, and local lighting rules so the new bulb works properly and remains road-legal. A quick visual check of the removed bulb can help confirm the correct base and size before you place an order.
The listed high beam headlight bulb size for the 2012 Mitsubishi Lancer is 9005 on many trims. Some versions may use a different headlight setup, so confirm the installed bulb before purchase.
Not always. Some 2012 Mitsubishi Lancer models use a D2S bulb for the combined high beam and low beam headlight setup, while others use a separate 9005 high beam bulb. The exact fit depends on trim and lighting package.
The front turn signal bulb is listed as 7440A for this model year. It is a good idea to verify the bulb in your vehicle, since lighting equipment can vary by market.
The rear turn signal bulb size listed for the 2012 Mitsubishi Lancer is 7440.
The brake light bulb is listed as 7443R for the 2012 Mitsubishi Lancer.
The outer tail light bulb size listed is 7443R. This is one of the key exterior bulbs to confirm when replacing rear lighting on the Lancer.
The inner tail light bulb is listed as 2825, 98 for the 2012 Mitsubishi Lancer.
The license plate light bulb is listed as 2825, 98. Check both sides if you are replacing the pair, since one bulb may fail before the other.
Both the dome light and map light use DE3175 bulbs on this vehicle.
The trunk or cargo area light uses a DE3022 bulb.
The front parking light bulb is listed as 2827 for the 2012 Mitsubishi Lancer.
The front side marker light bulb is listed as 2827.
The rear side marker light bulb is listed as 2825, 98.
The back up reverse light bulb is listed as 7440.
The front fog light bulb options listed are H11 LED, H16 LED, and H8 LED. The correct choice depends on the exact fog light housing and trim.
Yes, the center high mount stop light is listed as LED on this page.
Check the bulb position, your trim level, and the bulb already installed in the car. The 2012 Mitsubishi Lancer can have different lighting packages, so matching the existing bulb is the safest way to avoid fitment mistakes.